User's Guide

Related Topics
Build a Query for Logs on page 336
Build a Query for Logs
Take the following steps to build a customized query, filtering data in the Logs page:
1. To access the Logs page:
Go to Tools > Logs.
2. To open Query Builder, select Launch Query Builder.
Query Builder starts with a logical group of conditions. You can add more groups, joined with query
conditions. Valid conditions between two or more groups:
• AND
• OR
Note
AND is the only supported condition within a group.
3. To add a condition, select + Condition.
4. From Source Field, select a value that represents a column used in the query.
5. Select the Operator.
The available operators depend on the data type. Number types oer comparisons such as greater
or less than. Valid values are:
• Equals
• Not Equals
• Contains
• Greater Than
• Less Than
• Less or Equals
• Greater or Equals
6. Under Search Condition, provide the value that you are searching for.
Selecting the Search Condition field displays a drop-down of existing values. The list is filtered as
you type. Wildcards are not supported. To match a portion of the search condition, use the operator
Contains.
• Select + to add conditions.
• Select - to remove conditions.
7. To add another condition row, select + .
8. Group — Each group has conditions joined by the selected operator. You can add additional groups
or add conditions to the group.
Advanced Filtering
Tools
336 Extreme Campus Controller User Guide for version 5.46.03