User's Guide

The AP Upgrade Status Report is available on the following workbenches:
• Administration — Go to Administration > System > Software Upgrade. Scroll down to AP Images
and select Upgrade Status.
• Tools — Go to Tools > Logs > AP Upgrade Reports.
Note
Advanced Query and filtering from the Log workbench are not available for the AP
Upgrade Report.
The AP Upgrade Request does not provide a history of upgrades. If multiple upgrades are requested
for the same AP, only the most recent upgrade request is shown. To view event information for the
AP Upgrade Request, configure the System Log Level to Information. Go to Administration >
System > Logs.
Select
to configure the column display, refresh the display, or export the data in .csv.
Related Topics
Configuring Column Display on page 29
Logs on page 335
Install AP Firmware Image on page 363
Logs
The log messages contain the time of event, severity, source component, and any details generated by
the source component. Log messages are presented under the following report tabs:
• Events
• Station Events
• Audit
• AP Logs
• AP Upgrade Report on page 334
Working with the logging page:
• Select the plus icon next to each log entry to expand, showing entry details.
• Highlight log entries and (using shortcut keys) copy/paste entries into a third-party application.
• Create Date/Time filters to display entries that were logged within that time window.
Related Topics
Understanding Date and Time on page 30
System Logging Configuration on page 376
Set a Logging Filter on page 341
Advanced Filtering
Extreme Campus Controller oers a Query Builder to filter logs, enabling you to find records more
easily, improving eciency of diagnostics. Perform an advanced query over Events, Audit log, AP logs,
and Station events. The saved queries are persistent to each individual Log tab.
Tools
Logs
Extreme Campus Controller User Guide for version 5.46.03 335