User's Guide

Table Of Contents

Guest Portal: Guest Web Access

Table 77: Guest Portal — Guest Web Access

Field Description

Introduction Message The message displayed to a user when they register or gain

web access as an authenticated user of the network. Message

string parameters include Locale and a Text ﬁeld for a Terms of

Use Statement. The Introduction Message is shared by Guest

Web Access and Guest Registration. Modiﬁcations aect both

access types.

Custom Fields Select the ﬁelds to display on the portal website. Set the

visibility settings and determine if the ﬁeld is required.

You can also enable the Display Acceptable Use Policy, and

edit the policy for each conﬁgured locale.

These settings are shared by Guest Web Access and Guest

Registration. Modiﬁcations aect both access types.

Redirection Determine redirection behavior. Valid values are:

• Use Network Settings Redirection. Always redirect based on

network settings.

• Redirection to user's requested URL — Redirects the end

user to the web page they requested at network

connection.

• To speciﬁed URL — Specify the URL for the web page

redirection. Destination ﬁeld is displayed.

• Disabled — No redirection. End user remains on the web

page where they were accepted onto the network.

The option selected here overrides the Redirection option

speciﬁed on the Network Settings. These settings are shared by

Guest Web Access and Guest Registration. Modiﬁcations aect

both access types.

Note

Access Control Rule Registered Guests is created. Users who complete registration through

the Guest captive portal match this rule. The rule checks for end-system MAC addresses in the

Registered Guests group. This rule is present when Guest Registration or Guest Web Access is

enabled.