User's Guide
Table Of Contents
- Table of Contents
- Preface
- Welcome to Extreme Campus Controller
- Dashboard
- Monitor
- Sites List
- Device List
- Access Points List
- Smart RF Widgets
- Switches List
- Networks List
- Clients
- Policy
- Configure
- Network Configuration Steps
- Sites
- Add a Site
- Modifying Site Configuration
- Site Location
- Adding Device Groups to a Site
- Add or Edit a Configuration Profile
- Associated Profiles
- Associated Networks
- Mesh Point Profile Configuration
- Configure Client Bridge
- Understand Radio Mode
- Radio as a Sensor
- Advanced AP Radio Settings
- VLAN Profile Settings
- AirDefense Profile Settings
- ExtremeLocation Profile Settings
- IoT Profile Settings
- Positioning Profile Settings
- Analytics Profile Settings
- RTLS Settings
- Advanced Configuration Profile Settings
- Configuring RF Management
- Configuring a Floor Plan
- Advanced Tab
- Devices
- Networks
- Policy
- Automatic Adoption
- ExtremeGuest Integration
- AAA RADIUS Authentication
- Onboard
- Onboard AAA Authentication
- Manage Captive Portal
- Manage Access Control Groups
- Access Control Rules
- Tools
- Administration
- System Configuration
- Manage Administrator Accounts
- Extreme Campus Controller Applications
- Product License
- Glossary
- Index
Pre-defined Multicast Rules
1. Go to Policy > VLANS > Add, or select a VLAN.
2. Select Advanced.
3. Select Add Pre-Defined Rule.
4. Select a value from the Multicast Group field and click Add.
Related Topics
Configuring a Multicast Rule on page 273
Configuring VLANS on page 270
Configuring a Multicast Rule
1. Go to Policy > VLANS > Add, or select a VLAN.
2. Select Add New Rule.
3. Configure the following parameters:
IP address
Enter the multicast IP address for the trac destination.
CIDR
Classless Inter-Domain Routing. An address aggregation scheme that uses supernet addresses
to represent multiple IP destinations.
Wireless Replication
Enables the forwarding of multicast trac from a wireless client to other wireless clients. If
disabled, multicast trac from wireless clients is forwarded to wired clients only. Wireless clients
will not receive it.
Group
Indicates the multicast group associated with the rule. Multicast is a communication pattern in
which a source host sends a message to a group of destination hosts.
Local DHCP Management Settings
Configure the following Local DHCP settings:
Domain Name
The name of the domain that is allocated for the IP address range.
Lease (Seconds)
The DHCP Lease represents the time period between when a device obtains the IP address and the
time the IP address expires. When the Lease expires, the device releases the IP address and Extreme
Campus Controller issues a new one. Default Lease is 36000 seconds, Default Max Value is 2592000
seconds. Devices can request a lease value.
DNS Servers
Primary IP address for the DNS (Domain Name Server).
WINS Servers
IP address of the WINS (Windows Internet Name Service) server.
Gateway
Configure
VLANS
Extreme Campus Controller User Guide for version 5.46.03 273