User's Guide
Table Of Contents
- Table of Contents
- Preface
- Welcome to Extreme Campus Controller
- Dashboard
- Monitor
- Sites List
- Device List
- Access Points List
- Smart RF Widgets
- Switches List
- Networks List
- Clients
- Policy
- Configure
- Network Configuration Steps
- Sites
- Add a Site
- Modifying Site Configuration
- Site Location
- Adding Device Groups to a Site
- Add or Edit a Configuration Profile
- Associated Profiles
- Associated Networks
- Mesh Point Profile Configuration
- Configure Client Bridge
- Understand Radio Mode
- Radio as a Sensor
- Advanced AP Radio Settings
- VLAN Profile Settings
- AirDefense Profile Settings
- ExtremeLocation Profile Settings
- IoT Profile Settings
- Positioning Profile Settings
- Analytics Profile Settings
- RTLS Settings
- Advanced Configuration Profile Settings
- Configuring RF Management
- Configuring a Floor Plan
- Advanced Tab
- Devices
- Networks
- Policy
- Automatic Adoption
- ExtremeGuest Integration
- AAA RADIUS Authentication
- Onboard
- Onboard AAA Authentication
- Manage Captive Portal
- Manage Access Control Groups
- Access Control Rules
- Tools
- Administration
- System Configuration
- Manage Administrator Accounts
- Extreme Campus Controller Applications
- Product License
- Glossary
- Index
• Best Eort (1)
• Background (0)
Related Topics
Advanced Network Settings on page 254
Vendor Specific Attributes
Extreme Campus Controller provides the following Vendor Specific Attributes (VSAs) in the message to
the RADIUS server:
Table 67: Vendor Specific Attributes
Attribute Name ID Type Messages Description
AP-Name 2 string Sent to RADIUS
server
The name of the AP the client is
associating to. It can be used to assign
role based on AP name or location.
AP-Serial 3 string Sent to RADIUS
server
The AP serial number. It can be used
instead of (or in addition to) the AP
name.
AP Ethernet MAC string Sent to RADIUS
server
The MAC address of the AP used by the
ECP to determine client location.
AP Location string Sent to RADIUS
server
The physical location of the AP. Provided
by the network administrator.
VNS-Name 4 string Sent to RADIUS
server
The name of the Virtual Network the
client has been assigned to. It is used in
assigning role and billing options, based
on service selection.
SSID 5 string Sent to RADIUS
server
The name of the SSID the client is
associating to. It is used in assigning role
and billing options, based on service
selection.
BSS-MAC 6 string Sent to RADIUS
server
The name of the BSS-ID the client is
associating to. It is used in assigning role
and billing options, based on service
selection and location.
Role-Name 7 string Sent to RADIUS
server
The name of the role applied to the
station’s session.
Topology-Name 8 string Sent to RADIUS
server
The name of the topology applied to the
station’s session.
Ingress-RC-Name 9 string Sent to RADIUS
server
The name of the rate limit applied to the
station’s session’s outbound trac.
Egress-RC-Name 10 string Sent to RADIUS
server
The name of the rate limit applied to the
station’s session’s inbound trac.
RSS 11 integer Sent to RADIUS
server
Received Signal Strength.
RSS value in the RADIUS Accounting
logs can identify areas that have a weak
Wi-Fi signal. Use this information to
increase coverage in problem areas.
Configure Advanced Network Settings
Extreme Campus Controller User Guide for version 5.46.03 257