User's Guide
Table Of Contents
- Table of Contents
- Preface
- Welcome to Extreme Campus Controller
- Dashboard
- Monitor
- Sites List
- Device List
- Access Points List
- Smart RF Widgets
- Switches List
- Networks List
- Clients
- Policy
- Configure
- Network Configuration Steps
- Sites
- Add a Site
- Modifying Site Configuration
- Site Location
- Adding Device Groups to a Site
- Add or Edit a Configuration Profile
- Associated Profiles
- Associated Networks
- Mesh Point Profile Configuration
- Configure Client Bridge
- Understand Radio Mode
- Radio as a Sensor
- Advanced AP Radio Settings
- VLAN Profile Settings
- AirDefense Profile Settings
- ExtremeLocation Profile Settings
- IoT Profile Settings
- Positioning Profile Settings
- Analytics Profile Settings
- RTLS Settings
- Advanced Configuration Profile Settings
- Configuring RF Management
- Configuring a Floor Plan
- Advanced Tab
- Devices
- Networks
- Policy
- Automatic Adoption
- ExtremeGuest Integration
- AAA RADIUS Authentication
- Onboard
- Onboard AAA Authentication
- Manage Captive Portal
- Manage Access Control Groups
- Access Control Rules
- Tools
- Administration
- System Configuration
- Manage Administrator Accounts
- Extreme Campus Controller Applications
- Product License
- Glossary
- Index
Captive Portal Redirect Port List
Configure a port on the Extreme Campus Controller interface to which the client is redirected after the
ECP response. If ECP support is configured for HTTP then the port is typically 80, otherwise it is
typically 443. It is possible to configure a dierent port. The hw_port attribute appears in the
redirection response from Extreme Campus Controller.
1. Go to Configure > Networks > WLANS.
2. Select Enable Captive Portal.
3. Select CP Redirect Port List.
4. Select to add a port to the list.
5. To delete a port, select the port, and then select .
Advanced Network Settings
To configure advanced network settings:
1. Go to Configure > Networks > WLANS > Add.
2. Select Advanced.
3. Configure the following parameters:
OWE Transition Auto Provisioning
Enable this option to generate an Opportunistic Wireless Encryption (OWE) network
automatically when the network authentication is set to Open. OWE oers security to open
networks, ensuring that trac between an AP and a client is encrypted. Other clients can sni
and record trac, but cannot decrypt it.
Agile Multiband
Enables wireless devices to better respond to changing wireless network conditions. Improved
resource utilization helps balance wireless network load, increase capacity, and provide end
users the best possible wireless experience.
This feature is enabled by default. It is supported on ExtremeWireless access points AP3xx,
AP4xx, and AP5xx.
RADIUS Accounting
Indicates that the RADIUS server will also handle RADIUS accounting requests.
Extreme Campus Controller provides Vendor Specific Attributes (VSAs) in the message to the
RADIUS server. For more information, see Vendor Specific Attributes on page 257.
Hide SSID
Prevents the SSID from going in a beacon message but sends out the SSID when a device probes
the APs.
Include Hostname
Includes the AP Hostname in the beacon signal. Enable this setting to easily identify the access
point that is the originator of a particular signal without having to resort to BSSID conversion
tables. This feature can be useful during site surveys.
Advanced Network Settings
Configure
254 Extreme Campus Controller User Guide for version 5.46.03