User's Guide
Table Of Contents
- Table of Contents
- Preface
- Welcome to Extreme Campus Controller
- Dashboard
- Monitor
- Sites List
- Device List
- Access Points List
- Smart RF Widgets
- Switches List
- Networks List
- Clients
- Policy
- Configure
- Network Configuration Steps
- Sites
- Add a Site
- Modifying Site Configuration
- Site Location
- Adding Device Groups to a Site
- Add or Edit a Configuration Profile
- Associated Profiles
- Associated Networks
- Mesh Point Profile Configuration
- Configure Client Bridge
- Understand Radio Mode
- Radio as a Sensor
- Advanced AP Radio Settings
- VLAN Profile Settings
- AirDefense Profile Settings
- ExtremeLocation Profile Settings
- IoT Profile Settings
- Positioning Profile Settings
- Analytics Profile Settings
- RTLS Settings
- Advanced Configuration Profile Settings
- Configuring RF Management
- Configuring a Floor Plan
- Advanced Tab
- Devices
- Networks
- Policy
- Automatic Adoption
- ExtremeGuest Integration
- AAA RADIUS Authentication
- Onboard
- Onboard AAA Authentication
- Manage Captive Portal
- Manage Access Control Groups
- Access Control Rules
- Tools
- Administration
- System Configuration
- Manage Administrator Accounts
- Extreme Campus Controller Applications
- Product License
- Glossary
- Index
Band Steering on page 258
WLAN Service Settings
Table 60: WLAN Service Configuration Settings
Field Description
Network Name Enter a unique, user-friendly value that makes sense for your
business. Example: Sta
SSID Enter a character string to identify the wireless network.
Maximum 32 characters. Upper and lowercase allowed.
Example: PermanentSta
Hotspot The following values are valid for hotspot configuration:
• Disabled. Hotspot functionality is not enabled. Default
value.
• Enabled. Hotspots are enabled for this WLAN.
◦ Privacy is set by default to WPA.
◦ You must configure Protected Management Frame
(PMF).
◦ The authentication method is set to AAA with External
RADIUS Server. You can configure MBA, if required.
◦ Auth Type is WPA2-Enterprise (802.1x/EAP)
◦ You must disable the Advanced network setting Client-
Client Communication.
• OSU. Allows the definition of Online Sign Up or OSEN
WLAN. When configuring Online Signup for the hotspot,
you must configure a separate OSU WLAN. Then, specify
that WLAN on the Online Signup tab. Configure the policy
and topology assigned to the OSU WLAN to allow access
only to the OSU server. No access to the internet. Valid Auth
Type values for OSU Hotspot are:
◦ Open
◦ WPA2-Enterprise (802.1x/EAP)
Note: You must specify a AAA policy when configuring OSU for
Hotspot.
Note: After you have defined a WLAN service with a hotspot,
you cannot disable the hotspot. You can only delete the WLAN
service and recreate it.
For more information, see Hotspot on page 231.
Status Enable or disable the network service. Disabling the network
service shuts o the service but does not delete it.
Configure WLAN Service Settings
Extreme Campus Controller User Guide for version 5.46.03 221