User's Guide

Table 57: Switch Actions (continued)
Field Description
Retrieve Traces Initiates a traces routine creating a zip file that includes switch
configuration, state information, and log files. Extreme Campus
Controller receives the Traces zip file and presents a download-
able zip file in the Traces tab on the Monitor page for the
switch. Extreme Campus Controller keeps one file and
overwrites that file as subsequent files are received.
Assigned to Site Assign selected switches to a site. Assign to Site dialog
displays with available sites. Check one site and click Ok.
Related Topics
Assign to Site on page 219
Understanding Switch States
The following describes switch states on the Switches Device List.
Table 58: Switch State from the Device List
State Description
In-service:
• Switch acknowledges the sent configuration
• Switch sends statistics every 5 minutes.
In-Service Trouble:
• Switch in process of connecting to Extreme Campus
Controller
• Configuration is pending acknowledgment from switch
• Switch reset pending
• Switch reboot pending
• Switch upgrade pending
Unknown. Switch has not discovered the Extreme Campus
Controller.
Critical:
• Switch stops sending requests for 5 minutes or longer
• Consistent with a loss of connectivity to Extreme Campus
Controller
Adding a Switch
Access Points and Switches are automatically added to via the cloud-connector when the DHCP and
DNS prerequisites have been met. You can use the Add functionality to pre-provision any AP or switch
before they connect.
Switches
Configure
212 Extreme Campus Controller User Guide for version 5.46.03