User's Guide
Table Of Contents
- Table of Contents
- Preface
- Welcome to Extreme Campus Controller
- Dashboard
- Monitor
- Sites List
- Device List
- Access Points List
- Smart RF Widgets
- Switches List
- Networks List
- Clients
- Policy
- Configure
- Network Configuration Steps
- Sites
- Add a Site
- Modifying Site Configuration
- Site Location
- Adding Device Groups to a Site
- Add or Edit a Configuration Profile
- Associated Profiles
- Associated Networks
- Mesh Point Profile Configuration
- Configure Client Bridge
- Understand Radio Mode
- Radio as a Sensor
- Advanced AP Radio Settings
- VLAN Profile Settings
- AirDefense Profile Settings
- ExtremeLocation Profile Settings
- IoT Profile Settings
- Positioning Profile Settings
- Analytics Profile Settings
- RTLS Settings
- Advanced Configuration Profile Settings
- Configuring RF Management
- Configuring a Floor Plan
- Advanced Tab
- Devices
- Networks
- Policy
- Automatic Adoption
- ExtremeGuest Integration
- AAA RADIUS Authentication
- Onboard
- Onboard AAA Authentication
- Manage Captive Portal
- Manage Access Control Groups
- Access Control Rules
- Tools
- Administration
- System Configuration
- Manage Administrator Accounts
- Extreme Campus Controller Applications
- Product License
- Glossary
- Index
Figure 58: AP460e Professional Install Settings
Related Topics
Add APs on page 190
AP510e Professional Install Settings
The following rules apply to AP510e antenna installation:
• Group 1 (2.4GHz/5GHz) accepts identical dual band antennas.
• Group 2 (5GHz) accepts identical 5G or dual band antennas.
• Antennas must be configured consecutively for each group. Group 1 starts with Port 1/Group 1 and
Group 2 starts with Port 5/Group 2. An equal number of antennas must be configured for both
groups. For example, to support a 4x4 deployment, install Group 1 & Group 2 — 4 antennas each. To
support a 2x2 deployment, install Group 1 & Group 2 — 2 antennas each.
• Mode 1. Radios 1 and 2 are enabled when:
◦ One or more antennas are configured in Group 1.
• Mode 2. Radio 1 is a 2.4/5 GHz sensor and Radio 2 forwards trac.
◦ Radio 2 WLAN Service.
▪ Radio 2 5GHz WLAN service needs Group 1 antenna.
Configure
Access Points
Extreme Campus Controller User Guide for version 5.46.03 209