User's Guide

• Group 2 — Ports 5 and 6
Note
To display the Professional Install dialog, the AP must be part of an AP410e device group.
Figure 57: AP410e Professional Install Settings
Related Topics
Add APs on page 190
AP460e Professional Install Settings
The AP460e is an outdoor AP with external antennas. The AP460e has the following antenna layout:
• Radio 1 uses ports 5 and 6
• Radio 2 uses ports 1 through 4
• Radio 3 uses ports 7 and 8
• IoT radio uses port 9 (not configurable)
The default value for Radios 1-3 is “No Antenna”, and the default value for the IoT radio is “Internal."
The ports are grouped as follows. Each port in the group must be configured with the same antenna
model:
• Group 1 — Ports 1 through 4 (Radio 2)
• Group 2 — Ports 5 and 6 (Radio 1)
• Group 3 — Ports 7 and 8 (Radio 3)
Note
To display the Professional Install dialog, the AP must be part of an AP460e device group.
Access Points Configure
208 Extreme Campus Controller User Guide for version 5.46.03