User's Guide

Table 53: Advanced AP Setting Overrides (continued)
Field Description
Client Bridge Client Bridge Override — Select to enable override settings.
Roaming RSS Threshold — Determines when the client bridge
AP scans to find a better infrastructure AP. Valid range: from
-128 to -40. Default value is -70. A scan is triggered when one
or more of the following criteria is met:
• When the infrastructure AP RSS value is less than the
configured RSS Threshold.
• When the poll of the infrastructure AP is lost for one
second.
Note: When a WLAN is configured on the client bridge AP, a
scan is triggered whenever the poll of the infrastructure AP
is lost, regardless of the RSS Threshold.
You can configure this setting for all APs in a device group from
the device group Advanced Settings dialog. And, you can
override the device group setting for an individual AP from
here.
IOT Settings IoT is supported on the following access point models:
• AP3xx
• AP4xx
• AP5xx
• AP391x
You can configure beacon settings for all APs in a device group
from the device group Profile IoT tab. And you can override
some beacon application settings for an individual AP from
here. The following applications support AP overrides:
• iBeacon application. Overrides are supported for the
following settings:
◦ IoT iBeacon Major
◦ IoT iBeacon Minor
◦ Measured RSSI
• Eddystone-url Beacon application. Overrides are supported
for the following settings:
◦ Eddystone URL
◦ Measured RSSI
Note: If a beacon application is not configured in the device
group Profile, the IOT pane is empty.
Access Points Configure
200 Extreme Campus Controller User Guide for version 5.46.03