User's Guide
Table Of Contents
- Table of Contents
- Preface
- Welcome to Extreme Campus Controller
- Dashboard
- Monitor
- Sites List
- Device List
- Access Points List
- Smart RF Widgets
- Switches List
- Networks List
- Clients
- Policy
- Configure
- Network Configuration Steps
- Sites
- Add a Site
- Modifying Site Configuration
- Site Location
- Adding Device Groups to a Site
- Add or Edit a Configuration Profile
- Associated Profiles
- Associated Networks
- Mesh Point Profile Configuration
- Configure Client Bridge
- Understand Radio Mode
- Radio as a Sensor
- Advanced AP Radio Settings
- VLAN Profile Settings
- AirDefense Profile Settings
- ExtremeLocation Profile Settings
- IoT Profile Settings
- Positioning Profile Settings
- Analytics Profile Settings
- RTLS Settings
- Advanced Configuration Profile Settings
- Configuring RF Management
- Configuring a Floor Plan
- Advanced Tab
- Devices
- Networks
- Policy
- Automatic Adoption
- ExtremeGuest Integration
- AAA RADIUS Authentication
- Onboard
- Onboard AAA Authentication
- Manage Captive Portal
- Manage Access Control Groups
- Access Control Rules
- Tools
- Administration
- System Configuration
- Manage Administrator Accounts
- Extreme Campus Controller Applications
- Product License
- Glossary
- Index
Setting Floor Plan Scale on page 179
Drawing Boundary Walls on page 180
Drawing Inner Walls on page 181
Placing Devices on page 181
Assigning Badges on page 53
Floor Plans on page 24
Floor Plan View on page 50
Use Case: Device Group Filtering
View your devices on a floor plan to gain information about network readiness. Floor plans are
associated with the site. Each site can have one or more floor plans — typically, one plan per floor.
Devices that are displayed on the floor plan belong to a selected device group. All devices in a device
group must share the same platform (as well as profile configuration and RF Management).
The example site has four device groups and three floor plans:
• The site has two floors and an outdoor courtyard.
• Each floor and courtyard has a separate floor plan:
◦ First floor map
◦ Second floor map
◦ Outdoor courtyard map
• The site includes a device group for each AP platform:
◦ DG-3915
◦ DG-3935
◦ DG-3917
◦ DG-3965
• Floors 1 and 2 have a combination of AP models AP3935 and AP3915.
• The courtyard has AP Models AP3965 and AP3917.
To show all APs on the first floor, select device groups DG-AP3935 and DG-AP3915. Then, select the
First floor map.
To show all APs on the second floor, select device groups DG-AP3935 and DG-AP3915. Then, select the
Second floor map.
To show all APs in the outdoor courtyard, select device groups AP3965 and AP3917. Then, select
Outdoor courtyard map.
When working in the Floor Plan View you can toggle floor plan maps from the map panel.
Displaying Floors with Non-Assigned APs and Empty Floors
Before you can display a floor plan, you must select one or more device groups that include the devices
that are associated with the floor plan. If you have imported or created a floor plan that is not yet
associated with devices or if you are using a floor plan for an empty floor, you can still display the floor
plan:
• To display a floor plan with place-holder icons, select the device group Non-Assigned APs.
• To display a floor plan for an empty floor, select the device group Empty Floor.
Configuring
a Floor Plan Configure
176 Extreme Campus Controller User Guide for version 5.46.03