User's Guide

Table Of Contents

default Smart RF policy enables Neighbor Recovery for AP4xx and AP5xx. It requires a minimum of four

APs to function.

Note

Before you can edit these parameters, select Custom Sensitivity from the Basic Smart RF

conﬁguration tab.

Select Recovery > Neighbor Recovery and conﬁgure the following parameters.

Table 46: Neighbor Recovery Settings

Field Description

Power Hold Time (seconds) The number of seconds Smart RF waits before changing radio

channels in response to channel noise. This hold timer

deﬁnition avoids channel ﬂapping. Range is 0 to 3600 seconds.

Neighbor Recovery

2.4 GHz Neighbor Power Threshold

(dBm)

Deﬁnes the maximum power the 2.4 GHz radio will emit to

compensate for a failed neighbor radio. Valid values are -85 to

-55 dBm. Default value is -65 dBm.

5 GHz Neighbor Power Threshold

(dBm)

Deﬁnes the maximum power the 5GHz radio will emit to

compensate for a failed neighbor radio. Valid values are -85 to

-55 dBm. Default value is -65 dBm.

6 GHz Neighbor Power Threshold

(dBm)

Deﬁnes the maximum power the 6 GHz radio will emit to

compensate for a failed neighbor radio. Valid values are -85 to

-55 dBm. Default value is -65 dBm.

Dynamic Sample Recovery

Dynamic Sample Enabled Enables an administrator to deﬁne how Smart RF adjustments

are triggered by locking retry and threshold values.

Dynamic Sample Retries (1-10) Deﬁne the number of Dynamic Sample Retries.

Dynamic Sample Threshold (1-30) Deﬁne the Dynamic Sample Threshold.