User's Guide

individual channels you want to add to the channel plan while pressing the CTRL key, and then
select OK.
• For 5 GHz Radio nodes, select one of the following:
◦ All channels — ACS or Smart RF scans all channels for an operating channel and, when ACS or
Smart RF is triggered, the optimal channel is selected from all available channels.
This plan includes the following channels: 36, 40, 44, 48, 52, 56, 60, 64, 100,104,108,112, 116, 132,
136, 140,144, 149, 153, 157,161, 165.
◦ All Non-DFS Channels — ACS or Smart RF scans all non-DFS channels for an operating channel.
The AP selects the best non-DFS channel.
This plan includes the following channels: 36, 40, 44, 48, 149, 153, 157, 161, 165.
◦ Custom — To configure individual channels from which to select an operating channel, select
Configure. The Custom Channel Plan dialog displays. Select the individual channels you want to
include in the channel plan. To select contiguous channels, use the Shift key. To select multiple,
non-contiguous channels in the list, use the CTRL key. Select OK to save the configuration.
◦ Extended Channel with Weather— ACS or Smart RF selects the best channel from the available
channels list. Selected channel may be DFS, weather-radar DFS or non-DFS. Weather-radar
channels are approved for selected AP models in selected countries. Consult the compliance
information for the selected AP.
▪ This plan includes the following channels: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116,
120,124, 128, 132, 136, 140, 144, 149, 153, 157, 161, 165.
▪ The weather channel includes 5600-5650MHz sub-bands and requires a listening period
before the AP can provide wireless service. During the listening period, the Current Channel
field for DFS channels displays the value DFS Timeout, and the weather channel fields display
DFS Timeout . In Europe, the listening period can be up to 10 minutes. In the U.S., this period is
1 minute.
• For 6 GHz Radio nodes, select one of the following:
◦ All channels — ACS or Smart RF scans all channels for an operating channel and, when ACS or
Smart RF is triggered, the optimal channel is selected from all available channels.
◦ Custom — To configure individual channels from which to select an operating channel, select
Configure. The Custom Channel Plan dialog displays. Select the individual channels you want to
include in the channel plan. To select contiguous channels, use the Shift key. To select multiple,
non-contiguous channels in the list, use the CTRL key. Select OK to save the configuration.
This plan includes the following channels: 1, 5, 9, 13, 17, 21, 25, 29, 33, 37, 41, 45, 49, 53, 57,61, 65,
69, 73, 77, 81, 85, 89, 93, 97, 101, 105, 109, 113, 117, 121 125, 129, 133, 137, 141, 145, 149, 153, 157, 161, 165,
169, 173, 177, 181, 185, 189 193, 197, 201, 205, 209, 213, 217, 221, 225, 229, 233.
Note
For a list of channels that are included in the selected channel plan, select on the user
interface.
Related Topics
Channel and Power Settings on page 165
Configure
Configuring RF Management
Extreme Campus Controller User Guide for version 5.46.03 167