User's Guide
Table Of Contents
- Table of Contents
- Preface
- Welcome to Extreme Campus Controller
- Dashboard
- Monitor
- Sites List
- Device List
- Access Points List
- Smart RF Widgets
- Switches List
- Networks List
- Clients
- Policy
- Configure
- Network Configuration Steps
- Sites
- Add a Site
- Modifying Site Configuration
- Site Location
- Adding Device Groups to a Site
- Add or Edit a Configuration Profile
- Associated Profiles
- Associated Networks
- Mesh Point Profile Configuration
- Configure Client Bridge
- Understand Radio Mode
- Radio as a Sensor
- Advanced AP Radio Settings
- VLAN Profile Settings
- AirDefense Profile Settings
- ExtremeLocation Profile Settings
- IoT Profile Settings
- Positioning Profile Settings
- Analytics Profile Settings
- RTLS Settings
- Advanced Configuration Profile Settings
- Configuring RF Management
- Configuring a Floor Plan
- Advanced Tab
- Devices
- Networks
- Policy
- Automatic Adoption
- ExtremeGuest Integration
- AAA RADIUS Authentication
- Onboard
- Onboard AAA Authentication
- Manage Captive Portal
- Manage Access Control Groups
- Access Control Rules
- Tools
- Administration
- System Configuration
- Manage Administrator Accounts
- Extreme Campus Controller Applications
- Product License
- Glossary
- Index
Table 41: Advanced Configuration Profile Settings (continued)
Field Description
Enable SSH Determines if the Secure Shell (SSH) protocol is enabled.
Enable SSH for direct access to an AP. When enabling SSH,
configure a password. To configure an SSH password, go to
Admin > System > Maintenance. You can enable SSH for each
AP profile. By default, this setting is disabled.
Session Persistence Determines if session persistence is enabled. A persistent
session directs a client's requests to the same backend server
for the duration of a session or the time it takes to complete a
task or transaction. Enable this option to improve request
response times. For more information, see Session Persistence
on page 163.
Mgmt VLAN ID Separating management trac from user data trac is a
recommended practice. The Management VLAN ID is 1 by
default.
AP will accept wireless client even without active connection to
Extreme Campus Controller on WLANs where Extreme Campus
Controller is not required.
You can override the configuration Profile setting for one or
more individual APs from the Advanced > Overrides dialog for
the selected AP.
Tagged Check this option to tag the VLAN. Tagged VLAN packets
include header information that identifies which VLAN the
packet is coming from.
You can configure Tagged VLANs for all APs in a device group
from the device group Advanced Settings dialog. You can
override the configuration Profile setting for one or more
individual APs from the Advanced > Overrides dialog for the
selected AP.
MTU Maximum Transmission Unit in bytes. Determines the maximum
size of each packet in transmission.
Standard size is 1500 bytes. Extreme Campus Controller now
supports up to 1800 bytes. This enhancement facilitates the
transport of MU-DATA specifically between the AP and the
appliance (or between the AP and a switch for VxLAN
deployments) without incurring fragmentation.
You can override the configuration Profile setting for one or
more individual APs from the Advanced > Overrides dialog for
the selected AP.
Add or Edit a Configuration Profile Configure
158 Extreme Campus Controller User Guide for version 5.46.03