User's Guide
Table Of Contents
- Table of Contents
- Preface
- Welcome to Extreme Campus Controller
- Dashboard
- Monitor
- Sites List
- Device List
- Access Points List
- Smart RF Widgets
- Switches List
- Networks List
- Clients
- Policy
- Configure
- Network Configuration Steps
- Sites
- Add a Site
- Modifying Site Configuration
- Site Location
- Adding Device Groups to a Site
- Add or Edit a Configuration Profile
- Associated Profiles
- Associated Networks
- Mesh Point Profile Configuration
- Configure Client Bridge
- Understand Radio Mode
- Radio as a Sensor
- Advanced AP Radio Settings
- VLAN Profile Settings
- AirDefense Profile Settings
- ExtremeLocation Profile Settings
- IoT Profile Settings
- Positioning Profile Settings
- Analytics Profile Settings
- RTLS Settings
- Advanced Configuration Profile Settings
- Configuring RF Management
- Configuring a Floor Plan
- Advanced Tab
- Devices
- Networks
- Policy
- Automatic Adoption
- ExtremeGuest Integration
- AAA RADIUS Authentication
- Onboard
- Onboard AAA Authentication
- Manage Captive Portal
- Manage Access Control Groups
- Access Control Rules
- Tools
- Administration
- System Configuration
- Manage Administrator Accounts
- Extreme Campus Controller Applications
- Product License
- Glossary
- Index
Configure the AP to integrate with a Real-Time Location System (RTLS).
1. Select the plus sign to create a new profile ( ).
2. Configure the following parameters:
Table 40: RTLS Parameters
Field Description
Name Provide a name for the RTLS profile.
Application Select a supported RTLS application. Valid values are:
• AeroScout
• Ekahau
• Centrak. Supported on AP39xx only.
• Sonitor
Server IP Address The IP address of the RTLS application server.
Server Port Server port of the RTLS application server.
Multicast MAC Multicast MAC address for the RTLS application server.
Note: Centrak and Ekahau configuration oer a default port number and multicast address. You can
modify the default values if necessary.
3. Select Save.
Consider the following information related to Real-Time Location System (RTLS):
• Ensure that your location-based service tags are configured to transmit on all non-overlapping
channels 1, 6 and 11 (and on channels above 11 where allowed). For information about proper
deployment of the location-based solution, refer to the third-party documentation (AeroScout/
Ekahau/Centrak).
• Within an availability pair, tag report transmission pauses on fail-over APs until the APs are
configured and notified by the location-based server. With an availability pair, it is good practice to
configure each Extreme Campus Controller with the same location-based service.
• An RTLS profile cannot be deleted when it is part of an active configuration profile.
Related Topics
Add or Edit a Configuration Profile on page 122
Add or Edit a
Configuration Profile Configure
156 Extreme Campus Controller User Guide for version 5.46.03