User's Guide

Table 36: iBeacon Scan Settings (continued)
Field Description
UUID Identifier used to dierentiate a large group of related beacons.
A company can have a network of beacons with the same
UUID.
Used for filtering data. Extreme Campus Controller forwards
data with matching UUID to the Application Server and filters
out all other UUID data. If UUID configured value is all zeros, no
filtering occurs.
Min RSSI This is the signal strength required to include the packet in the
BLE report. Valid values: -10 to -100. Default value is -100. Data
from beacons with an RSSI that is less than the Min RSSI
configured value is filtered out.
Related Topics
iBeacon Settings on page 151
Eddystone-url Beacon Settings on page 153
Eddystone-url Scan Settings on page 154
Eddystone-url Beacon Settings
Table 37: Eddystone-url Beacon Settings
Field Description
Application Determines application type. Select Eddystone-url Beacon.
URL The URL that is included with the Eddystone-url beacon.
The URL is limited to 17 characters. The 17 characters does not
include the protocol, but it does include the domain name. A
secure protocol (HTTPS address) is required. The URL is
compressed, eectively allowing more than a 17-character
input. See https://github.com/google/eddystone/tree/master/
eddystone-url for the Eddystone-url compression rules to more
accurately judge the length of your URL. If necessary, also find
third-party URL Shortening Services available on the internet.
This setting can be defined for a specific AP. For more
information, see Advanced Setting Overrides on page 196.
Advertise Interval The advertising interval for the beacon application. Valid values
are: Min (100ms) and Max (10240ms). The default value is Min
(100ms).
Measured RSSI The calibrated (or measured) RSSI, in dBm for the beacon. The
transmitted beacon includes this value in the tag. Default
values are: iBeacon -47dBm, Eddystone beacon -5dBm. The
default precision value is acceptable in most cases. To calibrate
your own precise value: Using Eddystone Beacon, measure the
actual transmitter output from 1 meter away and add 41dBm.
(41dBm is the signal loss that occurs over 1 meter.) If you are
using Apple iBeacon, refer to: "Calibrating iBeacon" at https://
developer.apple.com/ibeacon/Getting-Started-with-
iBeacon.pdf
This setting can be defined for a specific AP. For more
information, see Advanced Setting Overrides on page 196.
Configure Add or Edit a Configuration Profile
Extreme Campus Controller User Guide for version 5.46.03 153