User's Guide
Table Of Contents
- Table of Contents
- Preface
- Welcome to Extreme Campus Controller
- Dashboard
- Monitor
- Sites List
- Device List
- Access Points List
- Smart RF Widgets
- Switches List
- Networks List
- Clients
- Policy
- Configure
- Network Configuration Steps
- Sites
- Add a Site
- Modifying Site Configuration
- Site Location
- Adding Device Groups to a Site
- Add or Edit a Configuration Profile
- Associated Profiles
- Associated Networks
- Mesh Point Profile Configuration
- Configure Client Bridge
- Understand Radio Mode
- Radio as a Sensor
- Advanced AP Radio Settings
- VLAN Profile Settings
- AirDefense Profile Settings
- ExtremeLocation Profile Settings
- IoT Profile Settings
- Positioning Profile Settings
- Analytics Profile Settings
- RTLS Settings
- Advanced Configuration Profile Settings
- Configuring RF Management
- Configuring a Floor Plan
- Advanced Tab
- Devices
- Networks
- Policy
- Automatic Adoption
- ExtremeGuest Integration
- AAA RADIUS Authentication
- Onboard
- Onboard AAA Authentication
- Manage Captive Portal
- Manage Access Control Groups
- Access Control Rules
- Tools
- Administration
- System Configuration
- Manage Administrator Accounts
- Extreme Campus Controller Applications
- Product License
- Glossary
- Index
Radio settings are dependent on the access point model.
Table 31: Advanced Radio Settings
Field Description
OCS Channels
Note: Supported on AP3xx, AP4xx, and AP5xx models.
Define custom channel list:
• Channels for Radio 1 are all 2.4 GHz or both 2.4 and 5 GHz
lower band channels. Channel width is selectable.
• Channels for Radio 2 are 5GHz channels or 5GHz upper
band channels. Channel width is selectable.
• Channels for Radio 3 (supported on the AP4000) are 6GHz
channels. See 6 GHz Channel Allocation and Notation on
page 15 for more information.
OCS Interval (DTIMs) DTIM interval must be between 2-100.
• R1 5G-L — 5.15-5.35GHz
• R2 5G-H — 5.5-5.925GHz
• R2 5G-F — 5.15-5.925GHz
• R1 2G-F —Channel 1 to 13 (Channel 14 for Japan)
Supported on the following 802.11ax APs:
• AP310i/e
• AP360i/e
• AP4000
• AP410i/e
• AP460i/e
• AP505i
• AP510i/e
• AP560i/h
LDPC Increases the reliability of the transmission resulting in a 2dB
increased performance compared to traditional 11n coding.
STBC Space Time Block Coding. A simple open loop transmit
diversity scheme. When enabled, STBC configuration is 2x1
(two spatial streams combined into one spatial stream). TXBF
overrides STBC if both are enabled for single stream rates.
Enable this setting when you anticipate single stream clients
with lower RSS power.
Add or Edit a Configuration Profile Configure
140 Extreme Campus Controller User Guide for version 5.46.03