User's Guide

Table 28: Profile Configuration Parameters (continued)
Field Description
Positioning Select a configured Positioning Profile. Or,
Select to add a new Profile.
Select to edit the selected Profile.
Note: Supported on AP39xx, AP3xx, AP4xx, and AP5xx.
Analytics Select a configured ExtremeAnalytics Profile. Or,
Select to add a new Profile.
Select to edit the selected Profile.
Note: Supported on AP39xx, AP3xx, AP4xx, and AP5xx.
RTLS Select a configured RTLS Profile. Or,
Select to add a new Profile.
Select to edit the selected Profile.
Related Topics
Advanced Configuration Profile Settings on page 157
Understand Radio Mode on page 134
Configure Client Bridge on page 130
Advanced AP Radio Settings on page 139
VLAN Profile Settings on page 146
AirDefense Profile Settings on page 147
Analytics Profile Settings on page 155
ExtremeLocation Profile Settings on page 148
IoT Profile Settings on page 149
Advanced Configuration and Mesh Device Settings on page 126
Positioning Profile Settings on page 154
RTLS Settings on page 155
Associated Profiles on page 124
Associated Profiles
A list of configuration Profiles that the role, network, or VLAN can be associated with. Select a Profile to
make the association. Clear a check box to disassociate the Profile.
Networks and roles must be associated with a configuration Profile. Topology assignment to a site is
inferred from the role and network assignment in the Profile. Each device group has a configuration
Profile assignment. Therefore, APs within the device group are associated with the network definition
(including VLAN assignment) and the role policy definition through the configuration Profile. After you
have configured the network and the policy, it is necessary to open each device group and associate the
configured network and the defined roles by editing the assigned configuration Profile.
Add or Edit a
Configuration Profile Configure
124 Extreme Campus Controller User Guide for version 5.46.03