User's Guide
Table Of Contents
- Table of Contents
- Preface
- Welcome to Extreme Campus Controller
- Dashboard
- Monitor
- Sites List
- Device List
- Access Points List
- Smart RF Widgets
- Switches List
- Networks List
- Clients
- Policy
- Configure
- Network Configuration Steps
- Sites
- Add a Site
- Modifying Site Configuration
- Site Location
- Adding Device Groups to a Site
- Add or Edit a Configuration Profile
- Associated Profiles
- Associated Networks
- Mesh Point Profile Configuration
- Configure Client Bridge
- Understand Radio Mode
- Radio as a Sensor
- Advanced AP Radio Settings
- VLAN Profile Settings
- AirDefense Profile Settings
- ExtremeLocation Profile Settings
- IoT Profile Settings
- Positioning Profile Settings
- Analytics Profile Settings
- RTLS Settings
- Advanced Configuration Profile Settings
- Configuring RF Management
- Configuring a Floor Plan
- Advanced Tab
- Devices
- Networks
- Policy
- Automatic Adoption
- ExtremeGuest Integration
- AAA RADIUS Authentication
- Onboard
- Onboard AAA Authentication
- Manage Captive Portal
- Manage Access Control Groups
- Access Control Rules
- Tools
- Administration
- System Configuration
- Manage Administrator Accounts
- Extreme Campus Controller Applications
- Product License
- Glossary
- Index
Add or Edit a Configuration Profile
Extreme Campus Controller is installed with a default configuration Profile for each AP platform. You
can modify the default Profile or create a new Profile, but default Profiles cannot be deleted.
New Profiles display the configuration settings that were delivered with your initial Extreme Campus
Controller installation. After making changes, if you need to return to a base Extreme Campus Controller
configuration, create a new Profile for the AP platform. The new Profile will consist of the initial settings.
Before configuring a unique configuration Profile, configure the networks and roles associated with the
new Profile.
1. Go to Configure > Sites and select a site.
2. Select the Device Groups tab.
3. To add a new device group, select Add. Or, select a device group from the list.
4. From the Profile field:
• To add a new profile, select . Then, provide a name and platform.
• To edit a profile, select
.
• To copy or clone a profile, select . Then, provide a name.
5. Configure the following parameters:
Table 28: Profile Configuration Parameters
Field Description
Name Name of the configuration Profile.
AP Platform Select the AP Platform on which to base the new configuration
Profile. Then, select Save.
The Profile settings display.
Advanced Select Advanced to view or modify Advanced Configuration
Profile Settings.
Networks Lists configured networks. Select a radio band and port (if
applicable) for a configured network.
Enable Band Steering per SSID for Wi-Fi 6 APs.
Mesh Points Define mesh points for a wireless mesh network. Extreme
Campus Controller allows one mesh point per AP, configured
on one or more radios. For more information, see Advanced
Configuration and Mesh Device Settings on page 126.
Note: Mesh and Client Bridge cannot be configured on the
same radio.
Roles List of configured policy roles. Select a policy role. You can also
add a new policy role, edit a policy role, or delete a policy role.
For more information, see:
• Preconfigured Policy Roles on page 112
• Add Policy Roles on page 260
Add or Edit a Configuration Profile Configure
122 Extreme Campus Controller User Guide for version 5.46.03