User's Guide

Site Location
To display your site location on a physical map from the Site workbench, provide site metadata
including map coordinates. To access Site metadata:
1. Go to Configure > Sites.
2. Select a site and select the Location tab.
3. Provide the following optional information:
• Site Manager Name
• Site Manager Email
• Site Manager Contact
◦ Region
◦ City
◦ Postal Code
◦ Campus
• Map Coordinates. Your site location is automatically displayed based on data in the geodatabase
served from your browser. You can also select a location on the map to populate the Map
Coordinates field, or type specific coordinates in this field.
Note
Depending on where your sites are located, the global map on the Sites list page will
zoom into that area. Site location is determined by the coordinates specified. The zoom
factor depends on the location of the sites.
4. Select Save.
Related Topics
Site Parameters on page 118
Adding Device Groups to a Site
Create the site, then add device groups to the site. To understand the relationship between sites, device
groups, and access points, see Device Groups on page 21.
To add a device group to an existing site:
1. Go to Configure > Sites and select a site from the list.
2. Select Device Groups, then select Add.
3. Configure the device group settings.
4. After the device group is added, select Save on the Site page.
Related Topics
Device Groups on page 21
Device Group Parameters on page 121
Profiles on page 22
RF Management on page 23
Adoption Rules on page 280
Site Location
Configure
120 Extreme Campus Controller User Guide for version 5.46.03