User's Guide

The Client Details displays a chart of client association with an AP.
Table 23: Tabs on the Client Screen
Tab Description
Dashboard Network charts provide throughput, volume, and speed
information for each client. Use this information to understand
network trac and load.
Sites Lists sites associated with the client.
Networks Lists the network services associated with the client. Select a
network to display network details. See WLAN Service Settings
on page 221 .
Access Points Lists access points associated with the client. Use the search
facility to find a specific AP. The AP Name that you specify is
displayed by default.
Station Events Log of station events for the client. Use the search facility to
locate a specific event. Search on any column heading. To
enable station events, go to Admin > System > Logs and check
Send Station Events.
Related Topics
Client Widgets on page 111
Station Events on page 109
Client Actions on page 107
Understanding Date and Time on page 30
Overview Dashboard on page 31
Floor Plans on page 24
System Logging Configuration on page 376
Station Events
Use the following information to troubleshoot access and performance for a specific client. Review
client details and events associated with a client. The event source can be the Access Control Engine or
the Wireless Manager. The fields in Table 24 are documented in alphabetical order.
Table 24: End-System Event Fields
Field Description
Access Control Engine IP address of the NAC (Network Access Control) server.
Authentication Type Indicates the type of 802.1x authentication or MAC
authentication. For example, 802.1X (PEAP).
Device Type Indicates device type for the client.
End System Indicates MAC address of the client.
Monitor Network Snapshot: Clients Dashboard
Extreme Campus Controller User Guide for version 5.46.03 109