User's Guide

4. Select the Mode: Allow List or Deny List.
5. To add MAC addresses to the list, select Add and enter a MAC address for the client.
6. To delete a MAC address from the list, select the MAC address from the list, then select Delete.
To select the entire list, select the MAC Address check box.
Related Topics
Client Access Lists on page 106
Global Client Access Lists on page 106
Client Actions
The following describes actions you can take on clients in the Clients list. From the Clients list, select one
or more clients and select one of the following actions from the Actions drop-down.
Figure 42: Client Actions Button
Table 21: Client Actions
Field Description
Delete Delete a client from the network.
• The client is removed from groups of which it was a
member.
• The client remains on an Allow list or Deny list, if it was
included on a list before deletion.
• Also Delete User Registrations indicates whether or not
the user registrations are being deleted along with the
client/end-system.
Disassociate Users are disassociated from the AP. Consequently, the users
must log on again and be authenticated on Extreme Campus
Controller before the wireless service is restored.
Reauthenticate The authentication state is not preserved during fast failover. If
a WLAN Service requires authentication, the client device must
reauthenticate. The session availability is not guaranteed
because authentication may require additional time during
which the user session may be disrupted.
Use this option to manually reauthenticate one or more clients.
Monitor Client Actions
Extreme Campus Controller User Guide for version 5.46.03 107