Release Notes
Table Of Contents
- INTRODUCTION:
- Firmware Specification:
- SUPPORTED APPLIANCES, ACCESS POINTS and Switches:
- Network Management Software Support
- INSTALLATION INFORMATION:
- Known Restrictions and Limitations:
- Supported web browsers
- Port List
- IETF Standards MIB Support:
- EXTREME Networks Private Enterprise MIB Support
- 802.11ac and 802.11n Clients
- RADIUS Servers and Supplicants
- Certification Authority
- RADIUS Attributes Support
- GLOBAL SUPPORT:
Extreme Campus Controller Customer Release Notes
2/17/2022 P/N: 9036946-09 Subject to Change Without Notice Page: 3 of 21
F0615-O
Enhanced client session handling logic on Access Points to assure response from Access
Points to Extreme Campus Controller’s session management.
CFD-6547
Corrected the condition that prevented editing previously configured floor plans.
CFD-6645
Changes in 05.26.04.0006
Enhanced device type recognition for Device group rules to match and filter intended
devices.
CFD-5973
Corrected detection of Apple devices types running iOS v14. CFD-6372
Rectified synchronization issue that prevented proper tunnel management within internal
components of Extreme Campus Controller.
CFD-6422
Enhancements in 05.26.03.0016
Enabled BLE/IoT functions for iBeacon/Eddystone (beacon) Send/Receive for Universal APs
(AP302W, AP305C/X, AP410C, AP460C and variants).
XCC-703
Adjusted Captive Portal Administration portal to dedicated access port, facilitating better
Access policy control on access to Guest-Management portal. Captive Portal user
administration portal has been remapped to port 8445.
XCC-897
Provided the option to include Location-Capable attribute, aligned to RFC 5580, for user
authorization via RADIUS.
XCC-808
Added vendor-specific attribute (VSA), which includes RSS for client station in RADIUS
requests.
XCC-858
Added a new option of "Throughput by Group" widget for custom reports generation. XCC-1247
Enhanced schedule reports to provide flexible reporting interval. XCC-1133
Enhancements in 05.26.02.0014
Added support for adoption of AP302W, the new 2x2 802.11ax wallplate Universal AP.
Supported models are:
• AP302W-FCC
• AP302W-WR
• AP302W-CAN
XCC-495
Introduced the Extreme Campus Controller E2122, supporting expandable management for
up to 4000 APs (HA). Requires Activation License (XCC-ACT-V5-HW) and device Adoption
Capacity Licenses (XCC-ORC-x-xxx).
Extreme Campus Controller V5.26.02 or newer installs only.
XCC-664
Enhanced Reports facility to provide better aggregate reporting representative of large venue
installations. Added ability to support reports based on customer-defined user groups,
enabling consolidation of metrics from different user categories combined in the same
widget.
Scheduler for Extreme Campus Controller v1.1.04 recommended in support of automatic
report scheduling.
XCC-715
Improved workflow for configuring physical link aggregation (LAG). LAG configuration will
automatically remap topologies assigned to member ports to the LAG port.
XCC-775