Installation Guide
Table Of Contents
- Table of Contents
- Preface
- Virtual Appliance Deployment
- Virtual Appliance Configuration
- Configure Virtual Switches for the Virtual Appliance
- Shut Down and Restart a Virtual Machine
- Index
Shut Down and Restart a Virtual Machine
Shut Down and Restart a Virtual Machine Using the Graphical User Interface
(GUI) on page 38
Shut Down a Virtual Machine on a Hyper-V Server on page 39
About This Task
You need to shut down a virtual machine before configuring it to gain more networking performance.
For information on how to access the Basic Configuration Wizard, see Access the Virtual Appliance
Console on page 25.
To shut down and restart the virtual machine using the CLI in the Basic Configuration Wizard:
Procedure
1. Type shutdown halt.
2. Press Enter.
The virtual machine shuts down.
3. Type shutdown reboot.
4. Press Enter.
The virtual machine restarts.
Shut Down and Restart a Virtual Machine Using the Graphical User
Interface (GUI)
Procedure
1. Navigate to Administration > System > Maintenance.
2. Select Halt System (SHUTDOWN).
The virtual machine shuts down.
3. Select Restart System (REBOOT).
The virtual machine restarts.
38
VE6120H Virtual Appliance Installation Guide for version 4.76.02