Installation Guide
Table Of Contents
- Table of Contents
- Preface
- Virtual Appliance Deployment
- Virtual Appliance Configuration
- Configure Virtual Switches for the Virtual Appliance
- Shut Down and Restart a Virtual Machine
- Index
4. Select External network, and select Allow management operating system to share this networks
adapter from Connection type to change VLAN ID for management operating system.
Note
The Allow management selection is required only if the external physical network card is
going to be shared between the Hyper-V host (host management) and the virtual
machine. For example, here we don't enable this on data port adapters (PhysAdapter1 and
2) having one to one mapping to the physical network cards.
Note
Only one virtual switch is created in this example, but more can be created by repeating
the procedure.
5. Select Ok and Apply.
Create a New Virtual Switch on the Host Server
Configure Virtual Switches for the Virtual Appliance
36 VE6120H Virtual Appliance Installation Guide for version 4.76.02