Installation Guide
Table Of Contents
- Table of Contents
- Preface
- Virtual Appliance Deployment
- Virtual Appliance Configuration
- Configure Virtual Switches for the Virtual Appliance
- Shut Down and Restart a Virtual Machine
- Index
10. Press Enter to accept the settings.
The default option for accepting the settings is A.
Your settings are now applied successfully.
Upgrade the Virtual Appliance Software
About This Task
If you are not installing the latest ExtremeCloud Appliance release, you need to upgrade the software to
the latest patch release.
Procedure
1. Go to the Extreme Networks Support site and download the most recent ExtremeCloud Appliance
software patch.
2. Log in to the virtual appliance using the admin user and password that you configured.
For more information, refer to the Set Up the Virtual Appliance Using the Basic Configuration Wizard
on page 28.
3. Go to Administration > System.
The System screen is displayed.
4. Select the Software Upgrade tab.
5. Navigate to the Upgrade section.
6. Select the plus icon to add the image file.
Figure 2: Upgrade section
The Copy Upgrade Image window is displayed.
7. To copy an upgrade or backup image to ExtremeCloud Appliance,
configure the following
parameters:
Image Type
Indicates the type of image file used. Valid values are:
• Upgrade
• Backup
Destination
Virtual Appliance
Configuration Upgrade the Virtual Appliance Software
VE6120H Virtual Appliance Installation Guide for version 4.76.02 31