Installation Guide

Procedure
1. Type an IP address.
2. Press Enter to accept the changes.
You are navigated to the Current Time Settings CLI.
Current Time Settings
About This Task
The current time settings option allows you to change the timezone as per your location.
Procedure
1. Press Enter to change the time settings.
2. Press Enter again to change the timezone.
The region number list is displayed. Pick a number from the region numbers displayed on screen to
select your continent.
3. Type a number that corresponds to the region.
You can type n to move down the list, or p to move up the list. To go back to the region selection,
type c.
4. Press Enter to run NTP as a client.
5. Proved the fully
qualified domain name of the NTP server.
6. Press Enter.
You are prompted to enter a second NTP server. The default option is y.
7. Type n and press Enter.
NTP client is enabled.
8. Press Enter to accept the timezone and NTP server changes.
You are navigated to the Controller Post
Configuration screen along with the menu.
9. If you want to revisit any of the previous screens or exit without applying the configuration changes,
enter one of the corresponding numbers or alphabets displayed on screen.
When you revisit any other screen, you will have to reconfigure all subsequent area settings. For
example, if you decide to reconfigure the admin password, which is at the beginning of the
configuration wizard, you will have to reconfigure all the subsequent configuration wizard settings.
Current Time Settings
Virtual Appliance Configuration
30 VE6120H Virtual Appliance Installation Guide for version 4.76.02