Specifications

Clarifications and Known Problems in Previous Releases

EPICenter Release Note

Download to BD8810 or BD10808 may fail due to timeout

Downloading an image or bootrom to a Black Diamond 8810 or 10808 sometimes fails due to timeout. If

this is a repeated problem you can change the Upload/Download Timeout Period property in the

EPICenter Administration under Server Properties, in the Devices Properties set. The default timeout is

60 seconds. 120 seconds (2 minutes) is recommended. (PD3-19758770)

Stacking devices may not be displayed in the Hardware Selection page

In the Upgrade Wizard, if you select an ExtremeWare or ExtremeXOS stacking image in the Image

Selection page, then select “Extreme Stacking” or “Extreme EXOS Stacking” under Device Types on the

Supported Hardware Selection page, devices of the selected type are not displayed in the Hardware

Selection page.

Inventory Management

Modify Device changed fields are not updated after Apply

When a change is made in the Modify Device dialog, after clicking Apply the change is not reflected in

the fields in the Modify Device window. You must close and re-open the Modify Device dialog to see

the changes. (PD3-89128855)

Additional Information field accepts more than 255 characters

Even though there is a 255-character limit on text in the Additional Information field, you can type

more than that into the field. However, the characters beyond 255 will not be saved. (PD3-82612460)

The Upload Device Info command does not work with SSH

The Upload Device Info command, used for uploading device status information, does not work if SSH

is enabled for the device in EPICenter, due to a timeout. To successfully upload the device information,

you must temporarily disable SSH for the device.

The ExtremeXOS config file saved by the Upload Device Info command has errors

If you use the Upload Device Info command for a device running ExtremeXOS, and select the option to

include the last uploaded configuration file, the Configuration file saved within the TAC_Info zip file

will produce CRC errors when you attempt to unzip it. (PD3-106577660)

Changing a device password via Modify Device does not work

In Modify Device, changing the device password (and selecting the “Device and Database” option) does

not change the password, even though EPICenter indicates the operation was successful. (PD3-

64421421)