Installation manual

Connecting to Network Backbone or Server
Extreme Networks EAS 200-24p Switch Hardware Installation Manual
23
Connecting to Network Backbone or Server
The combo SFP ports and the 1000BASE-T ports are ideal for uplinking to a network backbone, server
or server farm. The copper ports operate at a speed of 10/100/1000Mbps in full or half duplex mode.
The fiber-optic ports can operate at 1Gbps in full duplex mode.
Connections to the Gigabit Ethernet ports are made using a fiber-optic cable or Category 5e copper
cable, depending on the type of port. A valid connection is indicated when the Link LED is lit.
Figure 11: Connecting the Switch to a Server