Installation manual

Chapter 2: Installation

Extreme Networks EAS 200-24p Switch Hardware Installation Manual

Installing the Switch without a Rack

First, attach the rubber feet included with the switch if installing on a desktop or shelf. Attach these

cushioning feet on the bottom at each corner of the device. Allow enough ventilation space between the

switch and any other objects in the vicinity.

Figure 5: Prepare the Switch for Installation on a Desktop or Shelf

Attaching Brackets to a Switch for Rack Mounting

The switch can be mounted in a standard 19" rack using the provided mounting brackets. Use the

following diagrams as a guide.

Figure 6: Fasten Mounting Brackets on the Switch

Fasten the mounting brackets to the switch using the screws provided. With the brackets attached

securely, the switch can be mounted in a standard rack, as shown below.

NOTE

Please review the Installation Guidelines above before installing the switch in a rack. Make sure there is

adequate space around the switch to allow for proper air flow, ventilation, and cooling.