Installation manual

Extreme Networks EAS 200-24p Switch Hardware Installation Manual
11
CHAPTER
1
Introduction
Switch Description
The switch features the following specifications:
● EAS 200-24p: 20-Port 10/100/1000Base-T with 4 Combo Copper/SFP PoE ports, L2 management
switch.
This cost effective Gigabit switch provides an affordable solution for administrators to upgrade their
networks to high speed Gigabit connections. The advanced ACL and user authentication functions on
the switch extend the network security coverage from core to the edge.
The switch has a combination of 10/100/1000BASE-T(X) ports and SFP ports that may be used in
uplinking various network devices to the switch, including PCs, hubs and other switches to provide a
gigabit Ethernet uplink in full-duplex mode. The SFP (Small Form Factor Portable) combo ports are
used with fiber-optical transceiver cabling in order to uplink various other networking devices for a
gigabit link that may span great distances.
These SFP ports support full-duplex transmissions and can be used with the following transceivers:
● 10051 - SX mini-GBIC (Mini-GBIC SFP, 1000BASE-SX, MMF 220 & 550 meters, LC connector)
● 10052 - LX mini-GBIC (Mini-GBIC SFP, 1000BASE-LX, MMF 220 & 550 meters, SMF 10km, LC
connector)
● 10053 - ZX mini-GBIC (Mini-GBIC SFP, 1000BASE-ZX, SMF 70km, LC connector)
● 10056 - 1000BASE-BX-D BiDi SFP (1000BASE-BX-D SFP, 1490-nm TX/1310-nm RX wavelength)
● 10057 - 1000BASE-BX-U BiDi SFP (1000BASE-BX-U SFP, 1310-nm TX/1490-nm RX wavelength)
Features
The list below highlights the significant protocols and features supported by the switch.
● IEEE 802.3
● IEEE 802.3z
● IEEE 802.3x Flow Control in full-duplex compliant
● IEEE 802.3u
● IEEE 802.3ab