Specifications

Chapter 3: Layer 2 Features
Extreme Networks EAS 100-24t Switch Software Manual
92
To view this window, click L2 Features > LLDP > LLDP Dot3 TLVs Settings:
In this window, the following parameters can be configured:
Click on the Apply button to accept the changes made.
Parameter Description
From Port / To Port Use the drop-down menu to select a range of ports to be configured.
MAC/PHY Configuration Status This TLV optional data type indicates that the LLDP agent should transmit
'MAC/PHY configuration/status TLV'. This indicates it is possible for two ends
of an IEEE 802.3 link to be configured with different duplex and/or speed
settings and still establish some limited network connectivity. More precisely,
the information includes whether the port supports the auto-negotiation
function, whether the function is enabled, whether it has auto-negotiated
advertised capability, and what is the operational MAU type. The default state
is Disabled.
Link Aggregation The Link Aggregation option indicates that LLDP agents should transmit 'Link
Aggregation TLV'. This indicates the current link aggregation status of IEEE
802.3 MACs. More precisely, the information should include whether the port
is capable of doing link aggregation, whether the port is aggregated in an
aggregated link, and what is the aggregated port ID. The default state is
Disabled.
Maximum Frame Size The Maximum Frame Size indicates that LLDP agent should transmit
'Maximum-frame-size TLV. The default state is Disabled.