Specifications
Table Of Contents
- Table of Contents
- Preface Template Formats
- Web-based (GUI) Configuration
- Configuration
- Device Information
- System Information
- Serial Port Settings
- IP Address Settings
- IPv6 Address Settings
- IPv6 Route Settings
- IPv6 Neighbor Settings
- Port Configuration Folder
- Static ARP Settings
- User Accounts
- System Log Configuration Folder
- DHCP Relay Folder
- MAC Address Aging Time
- Web Settings
- Telnet Settings
- CLI Paging Settings
- Firmware Information
- SNTP Settings Folder
- SMTP Settings Folder
- SNMP Settings Folder
- Layer 2 Features
- Jumbo Frame
- VLANs
- 802.1Q Static VLAN
- Q-in-Q Folder
- 802.1v Protocol VLAN Folder
- GVRP Settings
- Asymmetric VLAN Settings
- MAC-based VLAN Settings
- PVID Auto Assign Settings
- Port Trunking
- LACP Port Settings
- Traffic Segmentation
- IGMP Snooping Folder
- MLD Snooping Settings
- Port Mirror
- Loopback Detection Settings Page
- Spanning Tree Folder
- Forwarding & Filtering Folder
- LLDP Folder
- Quality of Service (QoS)
- Security
- Access Control List (ACL)
- Monitoring
- Save and Tools
- System Log Entries
- Trap List
Forwarding & Filtering Folder
Extreme Networks EAS 100-24t Switch Software Manual
85
In this window, the following parameters can be configured:
Click on the Find button to find a specific entry based on the parameters entered.
Click on the Apply button to accept the changes made.
Click on the Edit button to re-configure a specific entry.
Forwarding & Filtering Folder
This folder contains windows for Unicast Forwarding and Multicast Forwarding.
Unicast Forwarding Settings
To view this window, click L2 Features > Forwarding & Filtering > Unicast Forwarding Settings:
In this window, the following parameters can be configured:
Click on the Apply button to accept the changes made.
Parameter Description
Port Use the drop-down menu to select a port.
Instance ID Displays the MSTI ID of the instance being configured. An entry of 0 in this
field denotes the CIST (default MSTI).
Internal Path Cost (1-
200000000)
This parameter is set to represent the relative cost of forwarding packets to
specified ports when an interface is selected within a STP instance. A lower
Internal cost represents a quicker transmission.
Priority Select a value between 0 and 240 to set the priority for the port interface. A
higher priority will designate the interface to forward packets first. A lower
number denotes a higher priority.
Parameter Description
VLAN ID (1-4094) The VLAN ID number of the VLAN on which the above Unicast MAC address
resides.
MAC Address The MAC address to which packets will be statically forwarded. This must be
a unicast MAC address.
Port Select the port number on which the MAC address entered above resides.
VLAN Name The VLAN Name associated with the subnet.