Specifications
Table Of Contents
- Table of Contents
- Preface Template Formats
- Web-based (GUI) Configuration
- Configuration
- Device Information
- System Information
- Serial Port Settings
- IP Address Settings
- IPv6 Address Settings
- IPv6 Route Settings
- IPv6 Neighbor Settings
- Port Configuration Folder
- Static ARP Settings
- User Accounts
- System Log Configuration Folder
- DHCP Relay Folder
- MAC Address Aging Time
- Web Settings
- Telnet Settings
- CLI Paging Settings
- Firmware Information
- SNTP Settings Folder
- SMTP Settings Folder
- SNMP Settings Folder
- Layer 2 Features
- Jumbo Frame
- VLANs
- 802.1Q Static VLAN
- Q-in-Q Folder
- 802.1v Protocol VLAN Folder
- GVRP Settings
- Asymmetric VLAN Settings
- MAC-based VLAN Settings
- PVID Auto Assign Settings
- Port Trunking
- LACP Port Settings
- Traffic Segmentation
- IGMP Snooping Folder
- MLD Snooping Settings
- Port Mirror
- Loopback Detection Settings Page
- Spanning Tree Folder
- Forwarding & Filtering Folder
- LLDP Folder
- Quality of Service (QoS)
- Security
- Access Control List (ACL)
- Monitoring
- Save and Tools
- System Log Entries
- Trap List
Spanning Tree Folder
Extreme Networks EAS 100-24t Switch Software Manual
83
To view this window, click L2 Features > Spanning Tree > MST Configuration Identification:
In this window, the following parameters can be configured:
Click on the Apply button to accept the changes made.
Click on the Edit button to re-configure a specific entry.
Click on the Delete button to remove the selected entry.
STP Instance Settings
The following window displays MSTIs currently set on the Switch.
Parameter Description
Configuration Name A previously configured name set on the Switch to uniquely identify the MSTI
(Multiple Spanning Tree Instance). If a configuration name is not set, this field
will show the MAC address to the device running MSTP. This field can be set
in the STP Bridge Global Settings window.
Revision Level
(0-65535)
This value, along with the Configuration Name will identify the MSTP region
configured on the Switch. The user may choose a value between 0 and 65535
with a default setting of 0.
MSTI ID (1-4) This field shows the MSTI IDs currently set on the Switch. This field will
always have the CIST MSTI, which may be configured but not deleted.
Type This field allows the user to choose a desired method for altering the MSTI
settings. The user has two choices.
Add VID - Select this parameter to add VIDs to the MSTI ID, in conjunction
with the VID List parameter.
Remove VID - Select this parameter to remove VIDs from the MSTI ID, in
conjunction with the VID List parameter.
VID List (1-4094) This field displays the VLAN IDs associated with the specific MSTI.