Specifications
Table Of Contents
- Table of Contents
- Preface Template Formats
- Web-based (GUI) Configuration
- Configuration
- Device Information
- System Information
- Serial Port Settings
- IP Address Settings
- IPv6 Address Settings
- IPv6 Route Settings
- IPv6 Neighbor Settings
- Port Configuration Folder
- Static ARP Settings
- User Accounts
- System Log Configuration Folder
- DHCP Relay Folder
- MAC Address Aging Time
- Web Settings
- Telnet Settings
- CLI Paging Settings
- Firmware Information
- SNTP Settings Folder
- SMTP Settings Folder
- SNMP Settings Folder
- Layer 2 Features
- Jumbo Frame
- VLANs
- 802.1Q Static VLAN
- Q-in-Q Folder
- 802.1v Protocol VLAN Folder
- GVRP Settings
- Asymmetric VLAN Settings
- MAC-based VLAN Settings
- PVID Auto Assign Settings
- Port Trunking
- LACP Port Settings
- Traffic Segmentation
- IGMP Snooping Folder
- MLD Snooping Settings
- Port Mirror
- Loopback Detection Settings Page
- Spanning Tree Folder
- Forwarding & Filtering Folder
- LLDP Folder
- Quality of Service (QoS)
- Security
- Access Control List (ACL)
- Monitoring
- Save and Tools
- System Log Entries
- Trap List
802.1v Protocol VLAN Folder
Extreme Networks EAS 100-24t Switch Software Manual
61
To view this window, click L2 Features > 802.1v Protocol VLAN > 802.1v Protocol VLAN Settings:
In this window, the following parameters can be configured:
Click on the Add button to add a new entry.
Click on the Find button to find a specific entry based on the parameters entered.
Click on the Show All button to view all the existing entries.
Click on the Delete All button to remove all the entries.
Parameter Description
Group ID Click the corresponding radio button to select a previously configured Group
ID from the drop-down menu.
Group Name Click the corresponding radio button to select a previously configured Group
Name from the drop-down menu.
VID (1-4094) Click the radio button to enter the VID. This is the VLAN ID that, along with
the VLAN Name, identifies the VLAN the user wishes to create.
VLAN Name Click the radio button to enter a VLAN Name. This is the VLAN Name that,
along with the VLAN ID, identifies the VLAN the user wishes to create.
802.1p Priority This parameter is specified to re-write the 802.1p default priority previously set
in the Switch, which is used to determine the CoS queue to which packets are
forwarded to. Once this field is specified, packets accepted by the Switch that
match this priority are forwarded to the CoS queue specified previously by the
user.
For more information on priority queues, CoS queues and mapping for 802.1p,
see the QoS section of this manual.
Port List (e.g.: 1-6) Here the user is only allowed to apply this feature to all the ports. The All
Ports option will be ticked.
Search Port List This function allows the user to search all previously configured port list
settings and display them on the lower half of the table. To search for a port
list enter the port number you wish to view and click Find. To display all
previously configured port lists on the bottom half of the window click the
Show All button, to clear all previously configured lists click the Delete All
button.