Specifications
Table Of Contents
- Table of Contents
- Preface Template Formats
- Web-based (GUI) Configuration
- Configuration
- Device Information
- System Information
- Serial Port Settings
- IP Address Settings
- IPv6 Address Settings
- IPv6 Route Settings
- IPv6 Neighbor Settings
- Port Configuration Folder
- Static ARP Settings
- User Accounts
- System Log Configuration Folder
- DHCP Relay Folder
- MAC Address Aging Time
- Web Settings
- Telnet Settings
- CLI Paging Settings
- Firmware Information
- SNTP Settings Folder
- SMTP Settings Folder
- SNMP Settings Folder
- Layer 2 Features
- Jumbo Frame
- VLANs
- 802.1Q Static VLAN
- Q-in-Q Folder
- 802.1v Protocol VLAN Folder
- GVRP Settings
- Asymmetric VLAN Settings
- MAC-based VLAN Settings
- PVID Auto Assign Settings
- Port Trunking
- LACP Port Settings
- Traffic Segmentation
- IGMP Snooping Folder
- MLD Snooping Settings
- Port Mirror
- Loopback Detection Settings Page
- Spanning Tree Folder
- Forwarding & Filtering Folder
- LLDP Folder
- Quality of Service (QoS)
- Security
- Access Control List (ACL)
- Monitoring
- Save and Tools
- System Log Entries
- Trap List
802.1v Protocol VLAN Folder
Extreme Networks EAS 100-24t Switch Software Manual
59
VLAN Translation Settings
VLAN translation translates the VLAN ID carried in the data packets it receives from private networks
into those used in the Service Providers network.
To view this window click L2 Features > Q-in-Q > VLAN Translation CVID Entry Settings:
In this window, the following parameters can be configured:
Click on the Apply button to accept the changes made.
Click on the Delete All button to remove all the entries.
802.1v Protocol VLAN Folder
The window allows the user to create Protocol VLAN groups and add protocols to that group. The
802.1v Protocol VLAN Group Settings supports multiple VLANs for each protocol and allows the user
to configure the untagged ports of different protocols on the same physical port. For example it allows
the user to configure an 802.1Q and 802.1v untagged port on the same physical port. The lower half of
the window displays any previously created groups.
Parameter Description
Action Specify to Add or Replace Service Provider VLAN ID (SVID) packets.
CVID (1-4094) The customer VLAN ID List to which the tagged packets will be added.
SVID(1-4094) This configures the VLAN to join the Service Providers VLAN as a tagged
member.