Specifications

Chapter 2: Configuration
Extreme Networks EAS 100-24t Switch Software Manual
30
Click on the Apply button to accept the changes made.
DHCP Relay Folder
This section contains information for configuring various attributes and properties for DHCP Relay
Configurations, including DHCP Relay Global and DHCP Relay Interface settings.
DHCP Relay Global Settings
This window allows the user to enable or disable the DHCP Relay State and configure the hop count
limit and threshold.
Facility Some of the operating system daemons and processes have been assigned Facility
values. Processes and daemons that have not been explicitly assigned a Facility
may use any of the "local use" facilities or they may use the "user-level" Facility.
Those Facilities that have been designated are shown in the following: Bold font
indicates the facility values that the Switch is currently employing.
Numerical
0
1
2
3
4
5
7
8
9
10
11
Facility Code
kernel messages
user-level messages
mail system
system daemons
security/authorization messages
messages generated internally by
syslog line printer subsystem
network news subsystem
UUCP subsystem
clock daemon
security/authorization messages
FTP daemon
Numerical
12
13
14
15
16
17
18
19
20
21
22
23
Facility Code
NTP subsystem
log audit
log alert
clock daemon
local use 0 (local0)
local use 1 (local1)
local use 2 (local2)
local use 3 (local3)
local use 4 (local4)
local use 5 (local5)
local use 6 (local6)
local use 7 (local7)
UDP Port
(514 or 6000-65535)
Type the UDP port number used for sending Syslog messages. The default is 514.
Status Choose Enabled or Disabled to activate or deactivate.
Parameter Description