Specifications

System Log Configuration Folder
Extreme Networks EAS 100-24t Switch Software Manual
29
In this window, the following parameters can be configured:
Parameter Description
Server ID Syslog server settings index (1-4).
Severity This drop-down menu allows you to select the level of messages that will be sent. The
options are Warning, Informational, and All.
Server IP Address The IP address of the Syslog server.
Facility Some of the operating system daemons and processes have been assigned Facility
values. Processes and daemons that have not been explicitly assigned a Facility may use
any of the "local use" facilities or they may use the "user-level" Facility. Those Facilities
that have been designated are shown in the following: Bold font indicates the facility
values that the Switch is currently employing.
Numerical Facility Code Numerical Facility Code
0
1
2
3
4
5
7
8
9
10
11
kernel messages
user-level messages
mail system
system daemons
security/authorization
messages
messages generated
internally by syslog
line printer
subsystem
network news
subsystem
UUCP subsystem
clock daemon
security/authorization
messages
FTP daemon
12
13
14
15
16
17
18
19
20
21
22
23
NTP subsystem
log audit
log alert
clock daemon
local use 0 (local0)
local use 1 (local1)
local use 2 (local2)
local use 3 (local3)
local use 4 (local4)
local use 5 (local5)
local use 6 (local6)
local use 7 (local7)
UDP Port
(514 or 6000-65535)
Type the UDP port number used for sending Syslog messages. The default is 514.
Status Choose Enabled or Disabled to activate or deactivate.
Parameter Description
Server ID Syslog server settings index (1-4).
Severity This drop-down menu allows you to select the level of messages that will be sent.
The options are Warning, Informational, and All.
Server IP Address The IP address of the Syslog server.