Specifications
Table Of Contents
- Table of Contents
- Preface Template Formats
- Web-based (GUI) Configuration
- Configuration
- Device Information
- System Information
- Serial Port Settings
- IP Address Settings
- IPv6 Address Settings
- IPv6 Route Settings
- IPv6 Neighbor Settings
- Port Configuration Folder
- Static ARP Settings
- User Accounts
- System Log Configuration Folder
- DHCP Relay Folder
- MAC Address Aging Time
- Web Settings
- Telnet Settings
- CLI Paging Settings
- Firmware Information
- SNTP Settings Folder
- SMTP Settings Folder
- SNMP Settings Folder
- Layer 2 Features
- Jumbo Frame
- VLANs
- 802.1Q Static VLAN
- Q-in-Q Folder
- 802.1v Protocol VLAN Folder
- GVRP Settings
- Asymmetric VLAN Settings
- MAC-based VLAN Settings
- PVID Auto Assign Settings
- Port Trunking
- LACP Port Settings
- Traffic Segmentation
- IGMP Snooping Folder
- MLD Snooping Settings
- Port Mirror
- Loopback Detection Settings Page
- Spanning Tree Folder
- Forwarding & Filtering Folder
- LLDP Folder
- Quality of Service (QoS)
- Security
- Access Control List (ACL)
- Monitoring
- Save and Tools
- System Log Entries
- Trap List
Port Configuration Folder
Extreme Networks EAS 100-24t Switch Software Manual
25
Port Error Disabled
The following window will display information about ports that have had their connection status
disabled for reasons such as loopback detection or Traffic Control.
To view this window, click Configuration > Port Configuration > Port Error Disabled:
In this window, the following parameters can be configured:
Port Media Type
The following window will display information about the port media type.
To view this window, click Configuration > Port Configuration > Port Media Type:
Parameter Description
Port Displays the port that has been error disabled.
Port State Describes the current running state of the port.
Connection Status This field will read the uplink status of the individual ports.
Reason Describes the reason why the port has been error-disabled, such as a
loopback occurrence.