Specifications

Chapter 2: Configuration
Extreme Networks EAS 100-24t Switch Software Manual
24
To view the Port Description Settings window, click Configuration > Port Configuration > Port
Description Settings:
Use the From Port and To Por t pull-down menus to choose a port or range of ports to describe, and
then enter a description of the port(s).
The Medium Type applies only to the Combo ports. If configuring the Combo ports this defines the
type of transport medium used. SFP ports should be nominated Fiber and the Combo 1000BASE-T ports
should be nominated Copper. The result will be displayed in the appropriate switch port number slot (C
for copper ports and F for fiber ports).
In this window, the following parameters can be configured:
Click on the Apply button to accept the changes made.
Parameter Description
From Port/To Port Use the pull-down menus to select the port or range of ports to be configured.
Medium Type This only applies to the Combo ports. If configuring the Combo ports, this
defines the type of transport medium used. SFP ports should be set at Fiber
and the Combo 1000BASE-T ports should be set at Copper.
Description Enter a string into the Description field to provide some information about the
port.