Specifications

Port Configuration Folder
Extreme Networks EAS 100-24t Switch Software Manual
21
To view the IPv6 Neighbor Settings, click Configuration > IPv6 Neighbor Settings:
In this window, the following parameters can be configured:
Click on the Add button to add a new IPv6 Neighbor address and Link Layer MAC Address.
Click on the Find button to find the specific entry based on the information entered.
Click on the Clear button to remove the entered data from the fields.
Port Configuration Folder
This section contains information for configuring various attributes and properties for individual
physical ports, including port speed and flow control.
Port Settings
Various port settings, including State, Speed/Duplex, Flow Control, Address Learning, Medium Type,
and MDIX can be configured on the Switch.
Parameter Description
Interface Name Displays the interface name. This field is not user-configurable. To search for
all the current interfaces on the Switch, go to the second Interface Name field
in the middle part of the window, tick the All check box, and then click the
Find button.
Neighbor IPv6 Address Enter the neighbor IPv6 address.
Link Layer MAC Address Enter the link layer MAC address.
State Use the drop-down menu to select All, Address, Static, or Dynamic.