Specifications
Table Of Contents
- Table of Contents
- Preface Template Formats
- Web-based (GUI) Configuration
- Configuration
- Device Information
- System Information
- Serial Port Settings
- IP Address Settings
- IPv6 Address Settings
- IPv6 Route Settings
- IPv6 Neighbor Settings
- Port Configuration Folder
- Static ARP Settings
- User Accounts
- System Log Configuration Folder
- DHCP Relay Folder
- MAC Address Aging Time
- Web Settings
- Telnet Settings
- CLI Paging Settings
- Firmware Information
- SNTP Settings Folder
- SMTP Settings Folder
- SNMP Settings Folder
- Layer 2 Features
- Jumbo Frame
- VLANs
- 802.1Q Static VLAN
- Q-in-Q Folder
- 802.1v Protocol VLAN Folder
- GVRP Settings
- Asymmetric VLAN Settings
- MAC-based VLAN Settings
- PVID Auto Assign Settings
- Port Trunking
- LACP Port Settings
- Traffic Segmentation
- IGMP Snooping Folder
- MLD Snooping Settings
- Port Mirror
- Loopback Detection Settings Page
- Spanning Tree Folder
- Forwarding & Filtering Folder
- LLDP Folder
- Quality of Service (QoS)
- Security
- Access Control List (ACL)
- Monitoring
- Save and Tools
- System Log Entries
- Trap List
Appendix A: System Log Entries
Extreme Networks EAS 100-24t Switch Software Manual
208
AAA server timed out AAA server <serverIP> (Protocol:
<protocol>) connection failed
Warning
Port security Port security has exceeded its
maximum learning size and will not
learn any new addresses
Port security violation (Port:
<portNum>, MAC: <macaddr>)
Warning
Port security write one permanent
record to flash
<portNum> port security entry (Port:
<portNum>, index: <index>, VID:
<vlanid>, MAC: <macaddr>)
Informational
IP and
Password
Changed
IP Address change activity Management IP address was changed
into <ipAddr> by (Username:
<username>, IP:<ipaddr>)
Informational
IP Address change activity by console Management IP address was changed
into <ipAddr> by console (Username:
<username>)
Informational
Password change activity User <username> Password was
changed by (Username: <username>,
IP:<ipaddr>)
Informational
Password change activity by console User <username> Password was
changed by console (Username:
<username>)
Informational
Packet Storm Broadcast strom occurrence Port <portNum> Broadcast storm is
occurring
Warning
Broadcast storm cleared Port <portNum> Broadcast storm has
cleared
Informational
Multicast storm occurrence Port <portNum> Multicast storm is
occurring
Warning
Multicast storm cleared Port <portNum> Multicast storm has
cleared
Informational
Port shutdown due to a packet storm Port <portNum> is currently shutdown
due to a packet storm
Warning
Configuration Testing Protocol detects
a loop in port
Configuration Testing Protocol detects
a loop in port <portNum>
Informational
802.1x VID assigned from RADIUS server
after RADIUS client is authenticated by
RADIUS server successfully .This VID
will be assigned to the port and this
port will be the VLAN untagged port
member.
Radius server <ipaddr> assigned VID:
<vlanid> to Port <portNum> (Account:
<username>)
Informational
802.1x Authentication failure 802.1x Authentication failure from
(Username: <username>, Port
<portNum>, MAC: <macaddr>)
Warning
802.1x Authentication failure for the
radius server timeout
802.1x Authentication failure for the
radius server <ipaddr> timeout from
(Username: <username>, Port
<portNum>, MAC: <macaddr>)
Warning
802.1x Authentication failure for the
802.1X client session timeout
802.1x Authentication failure for the
802.1X client session timeout from
(Username: <username>, Port
<portNum>, MAC: <macaddr>)
Warning
802.1x Authentication success 802.1x Authentication success from
(Username: <username>, Port
<portNum>, MAC: <macaddr>)
Informational
Category Event Description Log Content Severity