Specifications
Table Of Contents
- Table of Contents
- Preface Template Formats
- Web-based (GUI) Configuration
- Configuration
- Device Information
- System Information
- Serial Port Settings
- IP Address Settings
- IPv6 Address Settings
- IPv6 Route Settings
- IPv6 Neighbor Settings
- Port Configuration Folder
- Static ARP Settings
- User Accounts
- System Log Configuration Folder
- DHCP Relay Folder
- MAC Address Aging Time
- Web Settings
- Telnet Settings
- CLI Paging Settings
- Firmware Information
- SNTP Settings Folder
- SMTP Settings Folder
- SNMP Settings Folder
- Layer 2 Features
- Jumbo Frame
- VLANs
- 802.1Q Static VLAN
- Q-in-Q Folder
- 802.1v Protocol VLAN Folder
- GVRP Settings
- Asymmetric VLAN Settings
- MAC-based VLAN Settings
- PVID Auto Assign Settings
- Port Trunking
- LACP Port Settings
- Traffic Segmentation
- IGMP Snooping Folder
- MLD Snooping Settings
- Port Mirror
- Loopback Detection Settings Page
- Spanning Tree Folder
- Forwarding & Filtering Folder
- LLDP Folder
- Quality of Service (QoS)
- Security
- Access Control List (ACL)
- Monitoring
- Save and Tools
- System Log Entries
- Trap List
Extreme Networks EAS 100-24t Switch Software Manual
203
Login failed through Web (SSL) Login failed through Web (SSL)
(Username: <username>, IP:
<ipaddr>)
Warning
Logout through Web (SSL) Logout through Web (SSL)
(Username: <username>, IP:
<ipaddr>)
Informational
Web (SSL) session timed out Web (SSL) session timed out
(Username: <username>, IP:
<ipaddr>)
Informational
Telnet Successful login through Telnet Successful login through Telnet
(Username: <username>, IP:
<ipaddr>)
Informational
Login failed through Telnet Login failed through Telnet
(Username: <username>, IP:
<ipaddr>)
Warning
Logout through Telnet Logout through Telnet (Username:
<username>, IP: <ipaddr>)
Informational
Telnet session timed out Telnet session timed out (Username:
<username>, IP: <ipaddr>)
Informational
SNMP SNMP request received with invalid
community string
SNMP request received from
<ipAddress> with invalid community
string!
Warning
STP Topology changed Topology changed
(Instance:<InstanceID>
port<portNum>)
Informational
New Root selected [CIST | CIST Regional | MSTI
Regional] New Root bridge selected(
Instance: <InstanceID> MAC:
<macaddr> Priority :<value>)
Informational
BPDU Loop Back on Port BPDU Loop Back on Port <portNum> Warning
Spanning Tree Protocol is enabled Spanning Tree Protocol is enabled Informational
Spanning Tree Protocol is disabled Spanning Tree Protocol is disabled Informational
Root restriction enabled Port <portNum> STP root restriction is
enabled
Informational
Root restriction disabled Port <portNum> STP root restriction is
disabled
Informational
SSH Successful login through SSH Successful login through SSH
(Username: <username>, IP:
<ipaddr>)
Informational
Login failed through SSH Login failed through SSH (Username:
<username>, IP: <ipaddr>)
Warning
Logout through SSH Logout through SSH (Username:
<username>, IP: <ipaddr>)
Informational
SSH session timed out SSH session timed out (Username:
<username>, IP: <ipaddr>)
Informational
SSH server is enabled SSH server is enabled Informational
SSH server is disabled SSH server is disabled Informational
AAA Authentication Policy is enabled Authentication Policy is enabled
(Module: AAA)
Informational
Authentication Policy is disabled Authentication Policy is disabled
(Module: AAA)
Informational
Category Event Description Log Content Severity