Specifications
Table Of Contents
- Table of Contents
- Preface Template Formats
- Web-based (GUI) Configuration
- Configuration
- Device Information
- System Information
- Serial Port Settings
- IP Address Settings
- IPv6 Address Settings
- IPv6 Route Settings
- IPv6 Neighbor Settings
- Port Configuration Folder
- Static ARP Settings
- User Accounts
- System Log Configuration Folder
- DHCP Relay Folder
- MAC Address Aging Time
- Web Settings
- Telnet Settings
- CLI Paging Settings
- Firmware Information
- SNTP Settings Folder
- SMTP Settings Folder
- SNMP Settings Folder
- Layer 2 Features
- Jumbo Frame
- VLANs
- 802.1Q Static VLAN
- Q-in-Q Folder
- 802.1v Protocol VLAN Folder
- GVRP Settings
- Asymmetric VLAN Settings
- MAC-based VLAN Settings
- PVID Auto Assign Settings
- Port Trunking
- LACP Port Settings
- Traffic Segmentation
- IGMP Snooping Folder
- MLD Snooping Settings
- Port Mirror
- Loopback Detection Settings Page
- Spanning Tree Folder
- Forwarding & Filtering Folder
- LLDP Folder
- Quality of Service (QoS)
- Security
- Access Control List (ACL)
- Monitoring
- Save and Tools
- System Log Entries
- Trap List

Extreme Networks EAS 100-24t Switch Software Manual
201
APPENDIX
A
System Log Entries
The following table lists all possible entries and their corresponding meanings that will appear in the
System Log of this Switch.
Category Event Description Log Content Severity
System System cold start System cold start Critical
System warm start System warm start Critical
Configuration saved to flash Configuration saved to flash
(Username: <username>, IP:
<ipaddr>)
Informational
Configuration saved to flash by console Configuration saved to flash by
console (Username: <username>)
Informational
System log saved to flash System log saved to flash (Username:
<username>, IP: <ipaddr>)
Informational
System log saved to flash by console System log saved to flash by console
(Username: <username>)
Informational
Configuration and log saved to flash Configuration and log saved to flash
(Username: <username>, IP:
<ipaddr>)
Informational
Configuration and log saved to flash by
console
Configuration and log saved to flash
by console (Username: <username>)
Informational
Upload/Downl
oad
Firmware upgraded successfully Firmware upgraded successfully
(Username: <username>, IP:
<ipaddr>)
Informational
Firmware upgraded by console
successfully
Firmware upgraded by console
successfully (Username: <username>)
Informational
Firmware upgrade was unsuccessful Firmware upgrade was unsuccessful!
(Username: <username>, IP:
<ipaddr>)
Warning
Firmware upgrade by console was
unsuccessful
Firmware upgrade by console was
unsuccessful! (Username:
<username>)
Warning
Configuration successfully downloaded Configuration successfully downloaded
(Username: <username>, IP:
<ipaddr>)
Informational
Configuration successfully downloaded
by console
Configuration successfully by console
downloaded(Username: <username>)
Informational