Specifications
Table Of Contents
- Table of Contents
- Preface Template Formats
- Web-based (GUI) Configuration
- Configuration
- Device Information
- System Information
- Serial Port Settings
- IP Address Settings
- IPv6 Address Settings
- IPv6 Route Settings
- IPv6 Neighbor Settings
- Port Configuration Folder
- Static ARP Settings
- User Accounts
- System Log Configuration Folder
- DHCP Relay Folder
- MAC Address Aging Time
- Web Settings
- Telnet Settings
- CLI Paging Settings
- Firmware Information
- SNTP Settings Folder
- SMTP Settings Folder
- SNMP Settings Folder
- Layer 2 Features
- Jumbo Frame
- VLANs
- 802.1Q Static VLAN
- Q-in-Q Folder
- 802.1v Protocol VLAN Folder
- GVRP Settings
- Asymmetric VLAN Settings
- MAC-based VLAN Settings
- PVID Auto Assign Settings
- Port Trunking
- LACP Port Settings
- Traffic Segmentation
- IGMP Snooping Folder
- MLD Snooping Settings
- Port Mirror
- Loopback Detection Settings Page
- Spanning Tree Folder
- Forwarding & Filtering Folder
- LLDP Folder
- Quality of Service (QoS)
- Security
- Access Control List (ACL)
- Monitoring
- Save and Tools
- System Log Entries
- Trap List
Chapter 8: Save and Tools
Extreme Networks EAS 100-24t Switch Software Manual
200
Open the Tools drop-down menu on the left-hand side of the menu bar at the top of the Web manager
and click Download Firmware to open the following window:
Use the radio button to select either IPv4 or IPv6. Enter the TFTP Server IP address for the type of IP
selected. Specify the path/file name of the TFTP File. Select the desired Image ID, 1(Boot Up) or 2. Click
Download to initiate the file transfer.
Reboot System
The following window is used to restart the Switch.
Clicking the Yes radio button will instruct the Switch to save the current configuration to non-volatile
RAM before restarting the Switch.
Clicking the No radio button instructs the Switch not to save the current configuration before restarting
the Switch. All of the configuration information entered from the last time Save Changes was executed
will be lost.
Click the Reboot button to restart the Switch.