Specifications
Table Of Contents
- Table of Contents
- Preface Template Formats
- Web-based (GUI) Configuration
- Configuration
- Device Information
- System Information
- Serial Port Settings
- IP Address Settings
- IPv6 Address Settings
- IPv6 Route Settings
- IPv6 Neighbor Settings
- Port Configuration Folder
- Static ARP Settings
- User Accounts
- System Log Configuration Folder
- DHCP Relay Folder
- MAC Address Aging Time
- Web Settings
- Telnet Settings
- CLI Paging Settings
- Firmware Information
- SNTP Settings Folder
- SMTP Settings Folder
- SNMP Settings Folder
- Layer 2 Features
- Jumbo Frame
- VLANs
- 802.1Q Static VLAN
- Q-in-Q Folder
- 802.1v Protocol VLAN Folder
- GVRP Settings
- Asymmetric VLAN Settings
- MAC-based VLAN Settings
- PVID Auto Assign Settings
- Port Trunking
- LACP Port Settings
- Traffic Segmentation
- IGMP Snooping Folder
- MLD Snooping Settings
- Port Mirror
- Loopback Detection Settings Page
- Spanning Tree Folder
- Forwarding & Filtering Folder
- LLDP Folder
- Quality of Service (QoS)
- Security
- Access Control List (ACL)
- Monitoring
- Save and Tools
- System Log Entries
- Trap List

Configuration File Upload & Download
Extreme Networks EAS 100-24t Switch Software Manual
197
Configuration File Upload & Download
The Switch can upload and download configuration files.
Open the Tools drop-down menu on the left-hand side of the menu bar at the top of the Web manager
and click Configuration File Upload & Download to open the following window:
Use the radio button to select IPv4 and specify File name or use the radio button to select IPv6, enter a
Server IP, Interface Name, and File name. Click either Download or Upload to initiate the file transfer.
Upload Log File
To upload a log file, enter a Server IP address, use the radio button to select IPv4 and then enter a File
name, or use the radio button to select IPv6, enter a Server IP, Interface Name, and File name. Click
Upload.
Open the Tools drop-down menu on the left-hand side of the menu bar at the top of the Web manager
and click Upload Log File to open the following window: