Specifications
Table Of Contents
- Table of Contents
- Preface Template Formats
- Web-based (GUI) Configuration
- Configuration
- Device Information
- System Information
- Serial Port Settings
- IP Address Settings
- IPv6 Address Settings
- IPv6 Route Settings
- IPv6 Neighbor Settings
- Port Configuration Folder
- Static ARP Settings
- User Accounts
- System Log Configuration Folder
- DHCP Relay Folder
- MAC Address Aging Time
- Web Settings
- Telnet Settings
- CLI Paging Settings
- Firmware Information
- SNTP Settings Folder
- SMTP Settings Folder
- SNMP Settings Folder
- Layer 2 Features
- Jumbo Frame
- VLANs
- 802.1Q Static VLAN
- Q-in-Q Folder
- 802.1v Protocol VLAN Folder
- GVRP Settings
- Asymmetric VLAN Settings
- MAC-based VLAN Settings
- PVID Auto Assign Settings
- Port Trunking
- LACP Port Settings
- Traffic Segmentation
- IGMP Snooping Folder
- MLD Snooping Settings
- Port Mirror
- Loopback Detection Settings Page
- Spanning Tree Folder
- Forwarding & Filtering Folder
- LLDP Folder
- Quality of Service (QoS)
- Security
- Access Control List (ACL)
- Monitoring
- Save and Tools
- System Log Entries
- Trap List
Chapter 7: Monitoring
Extreme Networks EAS 100-24t Switch Software Manual
184
To view the Authenticator Diagnostics window for MAC-based, click Monitoring > Port Access
Control > Authenticator Diagnostics:
The following fields can be viewed:
Parameters Description
Port The identification number assigned to the Port by the System in which the
Port resides.
Connect Enter Counts the number of times that the state machine transitions to the
CONNECTING state from any other state.
Connect LogOff Counts the number of times that the state machine transitions from
CONNECTING to DISCONNECTED as a result of receiving an EAPOL-Logoff
message.
Auth Enter Counts the number of times that the state machine transitions from
CONNECTING to AUTHENTICATING, as a result of an EAP-Response/
Identity message being received from the Supplicant.
Auth Success Counts the number of times that the state machine transitions from
AUTHENTICATING to AUTHENTICATED, as a result of the Backend
Authentication state machine indicating successful authentication of the
Supplicant (authSuccess = TRUE).
Auth Timeout Counts the number of times that the state machine transitions from
AUTHENTICATING to ABORTING, as a result of the Backend Authentication
state machine indicating authentication timeout (authTimeout = TRUE).
Auth Fail Counts the number of times that the state machine transitions from
AUTHENTICATING to HELD, as a result of the Backend Authentication state
machine indicating authentication failure (authFail = TRUE).