Specifications
Table Of Contents
- Table of Contents
- Preface Template Formats
- Web-based (GUI) Configuration
- Configuration
- Device Information
- System Information
- Serial Port Settings
- IP Address Settings
- IPv6 Address Settings
- IPv6 Route Settings
- IPv6 Neighbor Settings
- Port Configuration Folder
- Static ARP Settings
- User Accounts
- System Log Configuration Folder
- DHCP Relay Folder
- MAC Address Aging Time
- Web Settings
- Telnet Settings
- CLI Paging Settings
- Firmware Information
- SNTP Settings Folder
- SMTP Settings Folder
- SNMP Settings Folder
- Layer 2 Features
- Jumbo Frame
- VLANs
- 802.1Q Static VLAN
- Q-in-Q Folder
- 802.1v Protocol VLAN Folder
- GVRP Settings
- Asymmetric VLAN Settings
- MAC-based VLAN Settings
- PVID Auto Assign Settings
- Port Trunking
- LACP Port Settings
- Traffic Segmentation
- IGMP Snooping Folder
- MLD Snooping Settings
- Port Mirror
- Loopback Detection Settings Page
- Spanning Tree Folder
- Forwarding & Filtering Folder
- LLDP Folder
- Quality of Service (QoS)
- Security
- Access Control List (ACL)
- Monitoring
- Save and Tools
- System Log Entries
- Trap List
Chapter 7: Monitoring
Extreme Networks EAS 100-24t Switch Software Manual
174
Port Access Control Folder
The following six windows are used to monitor 802.1X statistics of the Switch, on a per port basis.
RADIUS Authentication
This table contains information concerning the activity of the RADIUS authentication client on the client
side of the RADIUS authentication protocol.
To view the RADIUS Authentication window, click Monitoring > Port Access Control > RADIUS
Authentication:
The user may also select the desired time interval to update the statistics, between 1s and 60s, where “s”
stands for seconds. The default value is one second. To clear the current statistics shown, click the Clear
button in the top left hand corner.
In this window, the following parameters can be configured:
Parameters Description
InvalidServerAddresses The number of RADIUS Access-Response packets received from unknown
addresses.
Identifier The NAS-Identifier of the RADIUS authentication client. (This is not
necessarily the same as sysName in MIB II.)
ServerIndex The identification number assigned to each RADIUS Authentication server that
the client shares a secret with.
AuthServerAddress The (conceptual) table listing the RADIUS authentication servers with which
the client shares a secret.
ServerPortNumber The UDP port the client is using to send requests to this server.
RoundTripTime The time interval (in hundredths of a second) between the most recent
Access-Reply/Access-Challenge and the Access-Request that matched it from
this RADIUS authentication server.
AccessRequests The number of RADIUS Access-Request packets sent to this server. This
does not include retransmissions.
AccessRetransmissions The number of RADIUS Access-Request packets retransmitted to this
RADIUS authentication server.
AccessAccepts The number of RADIUS Access-Accept packets (valid or invalid) received from
this server.
AccessRejects The number of RADIUS Access-Reject packets (valid or invalid) received from
this server.