Specifications
Table Of Contents
- Table of Contents
- Preface Template Formats
- Web-based (GUI) Configuration
- Configuration
- Device Information
- System Information
- Serial Port Settings
- IP Address Settings
- IPv6 Address Settings
- IPv6 Route Settings
- IPv6 Neighbor Settings
- Port Configuration Folder
- Static ARP Settings
- User Accounts
- System Log Configuration Folder
- DHCP Relay Folder
- MAC Address Aging Time
- Web Settings
- Telnet Settings
- CLI Paging Settings
- Firmware Information
- SNTP Settings Folder
- SMTP Settings Folder
- SNMP Settings Folder
- Layer 2 Features
- Jumbo Frame
- VLANs
- 802.1Q Static VLAN
- Q-in-Q Folder
- 802.1v Protocol VLAN Folder
- GVRP Settings
- Asymmetric VLAN Settings
- MAC-based VLAN Settings
- PVID Auto Assign Settings
- Port Trunking
- LACP Port Settings
- Traffic Segmentation
- IGMP Snooping Folder
- MLD Snooping Settings
- Port Mirror
- Loopback Detection Settings Page
- Spanning Tree Folder
- Forwarding & Filtering Folder
- LLDP Folder
- Quality of Service (QoS)
- Security
- Access Control List (ACL)
- Monitoring
- Save and Tools
- System Log Entries
- Trap List
Chapter 2: Configuration
Extreme Networks EAS 100-24t Switch Software Manual
16
System Information
This window contains the System Information details. The user may enter a System Name, System
Location and System Contact to aid in defining the Switch, to the user's preference. This window
displays the MAC Address, and Firmware Version.
Click Configuration > System Information to display the following window:
In this window, the following parameters can be configured:
Click on the Apply button to accept the changes made.
Serial Port Settings
The following window allows the Baud Rate and the Auto Logout to be changed as well as containing
information about the Serial Port Settings.
Click Configuration > Serial Port Settings to display this window:
Parameter Description
System Name The name which identifies the switch in the Switch network.
System Location The location where the Switch is stored.
System Contact A contact name or number in the event that maintenance or support is
required.